You shouldn't set both radios to MASTER unless you want to WDS. One of them should be in MANAGED mode.
Ray Gwinn wrote about "Re: [leaf-wisp] Zebra/ospf": > I am wondering if I have basic radio setup problem. The two radios for the node to > hode hop are on the same channel (11) and in master mode. Is this correct? > > > By the way, a requirement of OSPF is that interface > > network/netmask should be the same on both of the routers. > > I have tried many variations. Currently the interface on one router is set to > 10.0.100.1/24, and 10.0.101.1/24 on the other router. The network is not the same, > but the netmask is. I have tried one big network 10.0.0.0/8 network also, with /8 > netmask on all IPs, and still no luck. > > Ray > > On 14 Jun 2004 at 23:20, Vladimir Ivashchenko wrote: > > > Hi, > > > > You can configure the OSPF authentication key using the menu, or > > using command line - look at " ip ospf message-digest-key" > > interface subcommand. > > > > Anyway, I'm interested to see output "sh ip ospf neigh" command. > > > > By the way, a requirement of OSPF is that interface > > network/netmask should be the same on both of the routers. > > > > Ray Gwinn wrote about "Re: [leaf-wisp] Zebra/ospf": > > > > > > Make sure that OSPF key is the same on both nodes, and check that > > > > > > I see nothing in the default conf files, or the zebra documentation about an > > > "OSPF key". Can you give more detail? > > > > > > Ray > > > > > > On 13 Jun 2004 at 14:38, Vladimir Ivaschenko wrote: > > > > > > > > > > > OSPF routing should work by default. > > > > > > > > Make sure that OSPF key is the same on both nodes, and check that > > > > routing tables are correct by doing "ip route". Note that if OSPF is > > > > working you will have routes with "proto zebra" in the list. > > > > > > > > Ray Gwinn wrote: > > > > > Vladimir, I have one wisp-disp node up and running fine. This node has > > > > > an internet feed via eth0. All hardware is Soekris 4521. > > > > > > > > > > I have now up a second node. This second node is wireless only. That > > > > > is, the second node's internet feed is one of the radios connected to a > > > > > small beam pointing at the first (working) node. User's can associate > > > > > with the second node, but there seems to be a routing problem. > > > > > > > > > > My question is, should the default wisp-disp zebra/ospf configs work on > > > > > both nodes? If not, can you provide any clues about configuring > > > > > zebra/ospf for the two nodes? > > > > > > > > > > Ray > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > This SF.Net email is sponsored by the new InstallShield X. > > > > >>From Windows to Linux, servers to mobile, InstallShield X is the > > > > > one installation-authoring solution that does it all. Learn more and > > > > > evaluate today! http://www.installshield.com/Dev2Dev/0504 > > > > > _______________________________________________ leaf-wisp-dist mailing > > > > > list [EMAIL PROTECTED] > > > > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > > > > > > > > > > > > > > -- > > > > Best Regards, > > > > Vladimir Ivashchenko > > > > ThunderWorx - www.thunderworx.com > > > > Senior Systems Designer/Engineer > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > This SF.Net email is sponsored by the new InstallShield X. > > > > >From Windows to Linux, servers to mobile, InstallShield X is the > > > > one installation-authoring solution that does it all. Learn more and > > > > evaluate today! http://www.installshield.com/Dev2Dev/0504 > > > > _______________________________________________ > > > > leaf-wisp-dist mailing list > > > > [EMAIL PROTECTED] > > > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > > > > > > > -- > > Best Regards, > > Vladimir Ivashchenko > > ThunderWorx - www.thunderworx.com > > Senior Systems Designer/Engineer > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference > > Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer > > Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA > > REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND > > _______________________________________________ > > leaf-wisp-dist mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference > Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer > Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA > REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist -- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer ------------------------------------------------------- This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
