It'll be better if you attach your : 1. Zebra config 2. Out put of "ip route"
regards -bino- ----- Original Message ----- From: "Iraone" <[EMAIL PROTECTED]> To: "leaf-wisp-dist" <leaf-wisp-dist@lists.sourceforge.net> Sent: Thursday, June 09, 2005 11:16 AM Subject: [leaf-wisp] Newbie RIP with gateway problem > HI, all > I try to run WISP on Teletronics CPR board on Box > Box A config : > wlan IP 10.10.10.1/29 > eth 202.75.104.8/192 > Box B config : > wlan IP 10.10.10.2/29 > eth 192.168.2.1/24 > it works well connect each other A to B, using RIP > but when I try to connect to default GW from Box A, > they didn't connect from B to A or vice versa , and > to default gateway too. > It rather confusing me cause there are no static route. > I've tried use OSPF but didn't work too > Thanks in advance , > > Taufik Irawan > Tech. Support Engineer > AMC, Pt > Tel : 62-21-4513821 > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput > a projector? How fast can you ride your desk chair down the office luge track? > If you want to score the big prize, get to know the little guy. > Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 > _______________________________________________ > leaf-wisp-dist mailing list > leaf-wisp-dist@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist > ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 _______________________________________________ leaf-wisp-dist mailing list leaf-wisp-dist@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
