I ran the './build.sh -f' and there were no apparent errors. The image file
was created "wisp-dist_1.3.1p34_img.bin"
I dd'd this file to an 8MB CF.
I put this into a Soekris board and it will not boot. the patch 33 version
of the .bin file I downloaded boots without trouble.
Any ideas? The patch 34 image does not even show anything on bootup ... as
if the boot loader is not even loading.
I have tried this on a RedHat 8 and RH9 system with identical results.
Can I attempt a re-compile of the newer AR5213 drivers with patch 33? ...
or preferably fix patch 34.
please advise.
Jeff Rhue - CTO
WiLogic, Inc.
714-230-8487
[EMAIL PROTECTED]
----- Original Message -----
From: "Vladimir Ivashchenko" <[EMAIL PROTECTED]>
To: "wispdist" <[EMAIL PROTECTED]>
Cc: <
Sent: Monday, June 13, 2005 4:34 AM
Subject: Re: [leaf-wisp] Atheros AR5213 support
Hi,
Yes, you need to upgrade the driver. Take a look at kernel build scripts
to see how driver is extracted.
If you finish this job, I would welcome your modifications. :)
On Sat, 2005-06-11 at 17:29 -0700, wispdist wrote:
I purchased some mini-PCI cards made by Ubiquiti networks that use the
newer
Atheros AR5213 chipset.
I installed it onto a Soekris board and the device does not show up.
the wlan and ath_hal modules are loaded but cannot see the card.
I am using the latest image downloaded ( wisp-dist_1.3.1p33_img.bin )
I noticed the madwifi driver is from 2003.
Do I need to update this?. I do have the build environment loaded to
re-compile.
If I need to do this, how do I insert the newer madwifi driver source
into
the tree and have it compiled into the wisp-dist image?
Please advise.
Jeff Rhue - CTO
WiLogic, Inc.
714-230-8487
[EMAIL PROTECTED]
----- Original Message -----
From: "bino_oetomo" <[EMAIL PROTECTED]>
To: "leaf-wisp-dist" <leaf-wisp-dist@lists.sourceforge.net>
Sent: Thursday, June 09, 2005 12:11 AM
Subject: Re: [leaf-wisp] Newbie RIP with gateway problem
> It'll be better if you attach your :
> 1. Zebra config
> 2. Out put of "ip route"
>
> regards
> -bino-
> ----- Original Message -----
> From: "Iraone" <[EMAIL PROTECTED]>
> To: "leaf-wisp-dist" <leaf-wisp-dist@lists.sourceforge.net>
> Sent: Thursday, June 09, 2005 11:16 AM
> Subject: [leaf-wisp] Newbie RIP with gateway problem
>
>
>> HI, all
>> I try to run WISP on Teletronics CPR board on Box
>> Box A config :
>> wlan IP 10.10.10.1/29
>> eth 202.75.104.8/192
>> Box B config :
>> wlan IP 10.10.10.2/29
>> eth 192.168.2.1/24
>> it works well connect each other A to B, using RIP
>> but when I try to connect to default GW from Box A,
>> they didn't connect from B to A or vice versa , and
>> to default gateway too.
>> It rather confusing me cause there are no static route.
>> I've tried use OSPF but didn't work too
>> Thanks in advance ,
>>
>> Taufik Irawan
>> Tech. Support Engineer
>> AMC, Pt
>> Tel : 62-21-4513821
>>
>>
>>
>>
>> -------------------------------------------------------
>> This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
> shotput
>> a projector? How fast can you ride your desk chair down the office
>> luge
> track?
>> If you want to score the big prize, get to know the little guy.
>> Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
>> _______________________________________________
>> leaf-wisp-dist mailing list
>> leaf-wisp-dist@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
>>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
> shotput
> a projector? How fast can you ride your desk chair down the office luge
> track?
> If you want to score the big prize, get to know the little guy.
> Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
> _______________________________________________
> leaf-wisp-dist mailing list
> leaf-wisp-dist@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
shotput
a projector? How fast can you ride your desk chair down the office luge
track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
--
Best Regards,
Vladimir Ivashchenko
Telecom Systems Design & Engineering
Thunderworx Cyprus - www.thunderworx.com
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
