I purchased some mini-PCI cards made by Ubiquiti networks that use the newer
Atheros AR5213 chipset.
I installed it onto a Soekris board and the device does not show up.
the wlan and ath_hal modules are loaded but cannot see the card.
I am using the latest image downloaded ( wisp-dist_1.3.1p33_img.bin )
I noticed the madwifi driver is from 2003.
Do I need to update this?. I do have the build environment loaded to
re-compile.
If I need to do this, how do I insert the newer madwifi driver source into
the tree and have it compiled into the wisp-dist image?
Please advise.
Jeff Rhue - CTO
WiLogic, Inc.
714-230-8487
[EMAIL PROTECTED]
----- Original Message -----
From: "bino_oetomo" <[EMAIL PROTECTED]>
To: "leaf-wisp-dist" <leaf-wisp-dist@lists.sourceforge.net>
Sent: Thursday, June 09, 2005 12:11 AM
Subject: Re: [leaf-wisp] Newbie RIP with gateway problem
It'll be better if you attach your :
1. Zebra config
2. Out put of "ip route"
regards
-bino-
----- Original Message -----
From: "Iraone" <[EMAIL PROTECTED]>
To: "leaf-wisp-dist" <leaf-wisp-dist@lists.sourceforge.net>
Sent: Thursday, June 09, 2005 11:16 AM
Subject: [leaf-wisp] Newbie RIP with gateway problem
HI, all
I try to run WISP on Teletronics CPR board on Box
Box A config :
wlan IP 10.10.10.1/29
eth 202.75.104.8/192
Box B config :
wlan IP 10.10.10.2/29
eth 192.168.2.1/24
it works well connect each other A to B, using RIP
but when I try to connect to default GW from Box A,
they didn't connect from B to A or vice versa , and
to default gateway too.
It rather confusing me cause there are no static route.
I've tried use OSPF but didn't work too
Thanks in advance ,
Taufik Irawan
Tech. Support Engineer
AMC, Pt
Tel : 62-21-4513821
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
shotput
a projector? How fast can you ride your desk chair down the office luge
track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you
shotput
a projector? How fast can you ride your desk chair down the office luge
track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
