It just doesn't get to work. It *keeps* complaining that it can't find Config::Std.
I don't know enough of perl and of lsmb to solve this. But o.t.o.h. I feel it shouldn't be as hard as it is now to install lsmb in F18, should it? ario On Sun, 2013-02-03 at 11:11 +0000, ario wrote: > After installing the perl-Config-Std from wieers' repository, and I dig > into some perl subdirectory, I found the following line inside some > Config/Std/Setting (or so): > > "From cpan.org" > > That must explain why it still doesnt what it should. > > Hold on, I'm still 'playing' with: > > export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5"; > > in /etc/bashrc, then restart (I think with my x86_64 it should be lib64, > no?), and > > $ sudo yum install cpan > > AND THAT is where the environment is set to /root/perl5 in /root/.bashrc > (if one answers thoughtlessly [yes] where it asks about it. > I think I could type [yes] there, but then immediately have to replace > /root/perl5 with /usr/lib64/perl5 > > correct? > > Then > > $ sudo cpan App::cpanminus > > (so the perl 'system' will take care of dependencies). > > and then the cpanm > > $ sudo cpanm Config::Std > > I'll post the result. > > > ario > > > > On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote: > > > > > > On Sat, Feb 2, 2013 at 7:42 AM, ario <ledger-smb-us...@infopower.nl> > > wrote: > > Ok, so I got a new VM with Fedora 18 minimal install on it, > > and after > > getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to prevent > > any > > mismatch with CPAN I didn't use it altogether, but instead > > did: > > > > > > Ok, so the best > > > > $ sudo yum install mlocate perl perl-Class-Std > > perl-ExtUtils-MakeMaker > > perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar > > > > Get repoforge's perl-Config-Std: > > $ curl > > http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm --O > > perl-Config-Std-0.900-1.rf.src.rpm > > > > $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm > > $ cd rpmbuild/SOURCES/ > > $ tar xzf Config-Std-0.900-1.tar.gz > > $ cd Config-Std-0.900 > > $ Makefile.PL > > $ make > > $ make test > > $ sudo make install > > > > > > $ cd ~ > > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > > > > > > Then, still it says: Error: ... Requires: perl-Config-Std > > even where '$ make test' terminated succesfully. > > > > > > > > > > Hmmm.... so rpm -q perl-Config-Std shows that it is installed but yum > > won't find it? > > > > > > Best Wishes, > > Chris Travers > > > > > > > > > > > > > > On Sat, 2013-02-02 at 14:04 +0000, ario wrote: > > > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers wrote: > > > > > > > > > > > > On Wed, Jan 30, 2013 at 9:45 AM, ario > > <ledger-smb-us...@infopower.nl> > > > > wrote: > > > > because I can't find it. > > > > > > > > http://ledgersmb.org/download says: Enable the > > EPEL > > > > repository, but I > > > > guess this only applies if one wants to install to > > RHEL and > > > > its flavors > > > > CentOS & Scientific Linux. > > > > > > > > Installing via cpan's cpanm results in that the > > module > > > > (perl-Config-Std) > > > > isn't found by the rpm. > > > > > > > > > > > > Yes, what actually happens is that it gets installed in > > the local root > > > > path. > > > > > > > > > > > > The first thing you will have to do is get rid of it where > > it is > > > > > > > > > > > > for example > > > > > > > > > > > > printenv | grep PERL_MM_OPT > > > > > > returns an empty string > > > > > > So I thought let's install 'dag wieers' > > > > > > > http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm > > > which claims to be distro-independent. > > > > > > Then > > > > > > $ sudo rpm -Uvh it, then tar xzg the > > perl-Config-Std-0.900.tar.gz file > > > > > > run > > > > > > $ perl Makefile.PL > > > $ make > > > $ make test > > > $ sudo make install > > > and then > > > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > > > > > > But still it's complaining there is no perl-Config-Std > > > > > > bummer... what now? > > > > > > > > > > Then delete that directory. > > > > > > > > > > > > Then > > > > > > > > > > > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan Config::Std > > > > > > > > > > > > and the rest..... > > > > > > > > > > > > Best wishes, > > > > Chris Travers > > > > > > > > A 'regular' Fedora 18 rpm for perl-Config-Std > > doesn't show up > > > > in Google. > > > > > > > > Any hints? > > > > > > > > > > > > thanks, > > > > ario > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > Everyone hates slow websites. So do we. > > > > Make your web apps faster with AppDynamics > > > > Download AppDynamics Lite for free today: > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > _______________________________________________ > > > > Ledger-smb-users mailing list > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > Everyone hates slow websites. So do we. > > > > Make your web apps faster with AppDynamics > > > > Download AppDynamics Lite for free today: > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > _______________________________________________ > > Ledger-smb-users mailing list > > Ledger-smb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > Everyone hates slow websites. So do we. > > > Make your web apps faster with AppDynamics > > > Download AppDynamics Lite for free today: > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > _______________________________________________ > > > Ledger-smb-users mailing list > > > Ledger-smb-users@lists.sourceforge.net > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_jan > > _______________________________________________ > > Ledger-smb-users mailing list > > Ledger-smb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_jan > > _______________________________________________ Ledger-smb-users mailing > > list Ledger-smb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan _______________________________________________ Ledger-smb-users mailing list Ledger-smb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
