Thanks for your reply.
With the help of the suggestion by Håvard Sørli, I was able to get it
locallinstalled also, by just rebuilding the
perl-Config-Std-0.900-rf.src.rpm ('rf' means 'repoforge' repository).regards, ario On Tue, 2013-02-05 at 09:23 -0500, Alvin Starr wrote: > I was able to build the various RPMs needed to get perl-Config-Std to > work as an RPM. > If someone wants I can post them both the RPMs and SRPMs. > > I can now localinstall ledgersmb. > I have not tested it but it installs without complaint. > > On 02/04/2013 11:13 AM, ario wrote: > > I was trying to install lsmb on an F18 VM. > > > > Now yum install perl-Config-Std didn't work for me because I wasn't able > > to find *any* F18 repository which would me let install it. > > > > So I tried your 2nd suggestion: cpanm Config::Std but that, even after > > following the suggestions from this list in this same thread, still > > resulted in complaints from > > yum localinstall ledgersmb-1.3.29-1.noarch.rp > > saying that it can't find (or rather: needs) Config::Std. > > > > So I'm quite at a loss here, unless you could point me to a > > F18-repository that contains perl-Config-Std, which would be very > > welcome. > > > > regards, > > ario > > > > > > On Mon, 2013-02-04 at 14:07 +0000, Lyle wrote: > >> No, I'm not on F18. But as a Perl programmer I install a lot of Perl > >> modules. > >> > >> > >> Lyle > >> > >> On 04/02/2013 13:42, ario wrote: > >> > >>> Hi Lyle, > >>> > >>> did you actually try that? :) > >>> > >>> regards, > >>> ario > >>> > >>> > >>> On Sun, 2013-02-03 at 16:52 +0000, Lyle wrote: > >>>> yum perl-Config-Std > >>>> > >>>> failing that > >>>> > >>>> cpan Config::Std > >>>> > >>>> > >>>> Lyle > >>>> > >>>> On 03/02/2013 16:28, ario wrote: > >>>>> It just doesn't get to work. > >>>>> It *keeps* complaining that it can't find Config::Std. > >>>>> > >>>>> I don't know enough of perl and of lsmb to solve this. > >>>>> But o.t.o.h. I feel it shouldn't be as hard as it is now to install lsmb > >>>>> in F18, should it? > >>>>> > >>>>> ario > >>>>> > >>>>> > >>>>> > >>>>> On Sun, 2013-02-03 at 11:11 +0000, ario wrote: > >>>>>> After installing the perl-Config-Std from wieers' repository, and I dig > >>>>>> into some perl subdirectory, I found the following line inside some > >>>>>> Config/Std/Setting (or so): > >>>>>> > >>>>>> "From cpan.org" > >>>>>> > >>>>>> That must explain why it still doesnt what it should. > >>>>>> > >>>>>> Hold on, I'm still 'playing' with: > >>>>>> > >>>>>> export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5"; > >>>>>> > >>>>>> in /etc/bashrc, then restart (I think with my x86_64 it should be > >>>>>> lib64, > >>>>>> no?), and > >>>>>> > >>>>>> $ sudo yum install cpan > >>>>>> > >>>>>> AND THAT is where the environment is set to /root/perl5 in > >>>>>> /root/.bashrc > >>>>>> (if one answers thoughtlessly [yes] where it asks about it. > >>>>>> I think I could type [yes] there, but then immediately have to replace > >>>>>> /root/perl5 with /usr/lib64/perl5 > >>>>>> > >>>>>> correct? > >>>>>> > >>>>>> Then > >>>>>> > >>>>>> $ sudo cpan App::cpanminus > >>>>>> > >>>>>> (so the perl 'system' will take care of dependencies). > >>>>>> > >>>>>> and then the cpanm > >>>>>> > >>>>>> $ sudo cpanm Config::Std > >>>>>> > >>>>>> I'll post the result. > >>>>>> > >>>>>> > >>>>>> ario > >>>>>> > >>>>>> > >>>>>> > >>>>>> On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote: > >>>>>>> On Sat, Feb 2, 2013 at 7:42 AM, ario <ledger-smb-us...@infopower.nl> > >>>>>>> wrote: > >>>>>>> Ok, so I got a new VM with Fedora 18 minimal install on it, > >>>>>>> and after > >>>>>>> getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to > >>>>>>> prevent > >>>>>>> any > >>>>>>> mismatch with CPAN I didn't use it altogether, but instead > >>>>>>> did: > >>>>>>> > >>>>>>> > >>>>>>> Ok, so the best > >>>>>>> > >>>>>>> $ sudo yum install mlocate perl perl-Class-Std > >>>>>>> perl-ExtUtils-MakeMaker > >>>>>>> perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar > >>>>>>> > >>>>>>> Get repoforge's perl-Config-Std: > >>>>>>> $ curl > >>>>>>> http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm > >>>>>>> --O > >>>>>>> perl-Config-Std-0.900-1.rf.src.rpm > >>>>>>> > >>>>>>> $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm > >>>>>>> $ cd rpmbuild/SOURCES/ > >>>>>>> $ tar xzf Config-Std-0.900-1.tar.gz > >>>>>>> $ cd Config-Std-0.900 > >>>>>>> $ Makefile.PL > >>>>>>> $ make > >>>>>>> $ make test > >>>>>>> $ sudo make install > >>>>>>> > >>>>>>> > >>>>>>> $ cd ~ > >>>>>>> $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > >>>>>>> > >>>>>>> > >>>>>>> Then, still it says: Error: ... Requires: perl-Config-Std > >>>>>>> even where '$ make test' terminated succesfully. > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> Hmmm.... so rpm -q perl-Config-Std shows that it is installed but yum > >>>>>>> won't find it? > >>>>>>> > >>>>>>> > >>>>>>> Best Wishes, > >>>>>>> Chris Travers > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> On Sat, 2013-02-02 at 14:04 +0000, ario wrote: > >>>>>>> > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers wrote: > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > On Wed, Jan 30, 2013 at 9:45 AM, ario > >>>>>>> <ledger-smb-us...@infopower.nl> > >>>>>>> > > wrote: > >>>>>>> > > because I can't find it. > >>>>>>> > > > >>>>>>> > > http://ledgersmb.org/download says: Enable the > >>>>>>> EPEL > >>>>>>> > > repository, but I > >>>>>>> > > guess this only applies if one wants to install > >>>>>>> to > >>>>>>> RHEL and > >>>>>>> > > its flavors > >>>>>>> > > CentOS & Scientific Linux. > >>>>>>> > > > >>>>>>> > > Installing via cpan's cpanm results in that the > >>>>>>> module > >>>>>>> > > (perl-Config-Std) > >>>>>>> > > isn't found by the rpm. > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > Yes, what actually happens is that it gets installed in > >>>>>>> the local root > >>>>>>> > > path. > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > The first thing you will have to do is get rid of it > >>>>>>> where > >>>>>>> it is > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > for example > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > printenv | grep PERL_MM_OPT > >>>>>>> > > >>>>>>> > returns an empty string > >>>>>>> > > >>>>>>> > So I thought let's install 'dag wieers' > >>>>>>> > > >>>>>>> > >>>>>>> http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm > >>>>>>> > which claims to be distro-independent. > >>>>>>> > > >>>>>>> > Then > >>>>>>> > > >>>>>>> > $ sudo rpm -Uvh it, then tar xzg the > >>>>>>> perl-Config-Std-0.900.tar.gz file > >>>>>>> > > >>>>>>> > run > >>>>>>> > > >>>>>>> > $ perl Makefile.PL > >>>>>>> > $ make > >>>>>>> > $ make test > >>>>>>> > $ sudo make install > >>>>>>> > and then > >>>>>>> > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > >>>>>>> > > >>>>>>> > But still it's complaining there is no perl-Config-Std > >>>>>>> > > >>>>>>> > bummer... what now? > >>>>>>> > > >>>>>>> > > >>>>>>> > > Then delete that directory. > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > Then > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan Config::Std > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > and the rest..... > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > Best wishes, > >>>>>>> > > Chris Travers > >>>>>>> > > > >>>>>>> > > A 'regular' Fedora 18 rpm for perl-Config-Std > >>>>>>> doesn't show up > >>>>>>> > > in Google. > >>>>>>> > > > >>>>>>> > > Any hints? > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > thanks, > >>>>>>> > > ario > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> > >>>>>>> ------------------------------------------------------------------------------ > >>>>>>> > > Everyone hates slow websites. So do we. > >>>>>>> > > Make your web apps faster with AppDynamics > >>>>>>> > > Download AppDynamics Lite for free today: > >>>>>>> > > http://p.sf.net/sfu/appdyn_d2d_jan > >>>>>>> > > _______________________________________________ > >>>>>>> > > Ledger-smb-users mailing list > >>>>>>> > > Ledger-smb-users@lists.sourceforge.net > >>>>>>> > > > >>>>>>> > >>>>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>>>> > > > >>>>>>> > > > >>>>>>> > >>>>>>> ------------------------------------------------------------------------------ > >>>>>>> > > Everyone hates slow websites. So do we. > >>>>>>> > > Make your web apps faster with AppDynamics > >>>>>>> > > Download AppDynamics Lite for free today: > >>>>>>> > > http://p.sf.net/sfu/appdyn_d2d_jan > >>>>>>> > > _______________________________________________ > >>>>>>> Ledger-smb-users mailing list > >>>>>>> Ledger-smb-users@lists.sourceforge.net > >>>>>>> > >>>>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>>>> > > >>>>>>> > > >>>>>>> > > >>>>>>> > > >>>>>>> > >>>>>>> ------------------------------------------------------------------------------ > >>>>>>> > Everyone hates slow websites. So do we. > >>>>>>> > Make your web apps faster with AppDynamics > >>>>>>> > Download AppDynamics Lite for free today: > >>>>>>> > http://p.sf.net/sfu/appdyn_d2d_jan > >>>>>>> > _______________________________________________ > >>>>>>> > Ledger-smb-users mailing list > >>>>>>> > Ledger-smb-users@lists.sourceforge.net > >>>>>>> > > >>>>>>> > >>>>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> ------------------------------------------------------------------------------ > >>>>>>> Everyone hates slow websites. So do we. > >>>>>>> Make your web apps faster with AppDynamics > >>>>>>> Download AppDynamics Lite for free today: > >>>>>>> http://p.sf.net/sfu/appdyn_d2d_jan > >>>>>>> _______________________________________________ > >>>>>>> Ledger-smb-users mailing list > >>>>>>> Ledger-smb-users@lists.sourceforge.net > >>>>>>> > >>>>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>>>> > >>>>>>> > >>>>>>> ------------------------------------------------------------------------------ > >>>>>>> Everyone hates slow websites. So do we. > >>>>>>> Make your web apps faster with AppDynamics > >>>>>>> Download AppDynamics Lite for free today: > >>>>>>> http://p.sf.net/sfu/appdyn_d2d_jan > >>>>>>> _______________________________________________ Ledger-smb-users > >>>>>>> mailing list Ledger-smb-users@lists.sourceforge.net > >>>>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>> ------------------------------------------------------------------------------ > >>>>> Everyone hates slow websites. So do we. > >>>>> Make your web apps faster with AppDynamics > >>>>> Download AppDynamics Lite for free today: > >>>>> http://p.sf.net/sfu/appdyn_d2d_jan > >>>>> _______________________________________________ > >>>>> Ledger-smb-users mailing list > >>>>> Ledger-smb-users@lists.sourceforge.net > >>>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>>>> > >>>> ------------------------------------------------------------------------------ > >>>> Everyone hates slow websites. So do we. > >>>> Make your web apps faster with AppDynamics > >>>> Download AppDynamics Lite for free today: > >>>> http://p.sf.net/sfu/appdyn_d2d_jan > >>>> _______________________________________________ > >>>> Ledger-smb-users mailing list > >>>> Ledger-smb-users@lists.sourceforge.net > >>>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>> > >>> ------------------------------------------------------------------------------ > >>> Everyone hates slow websites. So do we. > >>> Make your web apps faster with AppDynamics > >>> Download AppDynamics Lite for free today: > >>> http://p.sf.net/sfu/appdyn_d2d_jan > >>> _______________________________________________ > >>> Ledger-smb-users mailing list > >>> Ledger-smb-users@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > >>> > >> ------------------------------------------------------------------------------ > >> Everyone hates slow websites. So do we. > >> Make your web apps faster with AppDynamics > >> Download AppDynamics Lite for free today: > >> http://p.sf.net/sfu/appdyn_d2d_jan > >> _______________________________________________ Ledger-smb-users mailing > >> list Ledger-smb-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_jan > > _______________________________________________ > > Ledger-smb-users mailing list > > Ledger-smb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Ledger-smb-users mailing list Ledger-smb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
