Yes, 5: /root/.cpan/build/Config-Std-0.900-Kj061j/blib/lib/Config/Std.pm /root/.cpan/build/Config-Std-0.900-Kj061j/lib/Config/Std.pm /root/.cpan/build/Config-Std-0.900-OayslD/blib/lib/Config/Std.pm /root/.cpan/build/Config-Std-0.900-OayslD/lib/Config/Std.pm /usr/local/share/perl5/Config/Std.pm
regards On Mon, 2013-02-04 at 18:03 +0000, Lyle wrote: > I guessed at that RPM, one might not exist. I always use cpan. Did > cpan install the module successfully? > > updatedb > locate Std.pm > > Does it give a folder that has Config/Std.pm? > > > Lyle > > On 04/02/2013 16:13, ario wrote: > > > I was trying to install lsmb on an F18 VM. > > > > Now yum install perl-Config-Std didn't work for me because I wasn't able > > to find *any* F18 repository which would me let install it. > > > > So I tried your 2nd suggestion: cpanm Config::Std but that, even after > > following the suggestions from this list in this same thread, still > > resulted in complaints from > > yum localinstall ledgersmb-1.3.29-1.noarch.rp > > saying that it can't find (or rather: needs) Config::Std. > > > > So I'm quite at a loss here, unless you could point me to a > > F18-repository that contains perl-Config-Std, which would be very > > welcome. > > > > regards, > > ario > > > > > > On Mon, 2013-02-04 at 14:07 +0000, Lyle wrote: > > > No, I'm not on F18. But as a Perl programmer I install a lot of Perl > > > modules. > > > > > > > > > Lyle > > > > > > On 04/02/2013 13:42, ario wrote: > > > > > > > Hi Lyle, > > > > > > > > did you actually try that? :) > > > > > > > > regards, > > > > ario > > > > > > > > > > > > On Sun, 2013-02-03 at 16:52 +0000, Lyle wrote: > > > > > yum perl-Config-Std > > > > > > > > > > failing that > > > > > > > > > > cpan Config::Std > > > > > > > > > > > > > > > Lyle > > > > > > > > > > On 03/02/2013 16:28, ario wrote: > > > > > > It just doesn't get to work. > > > > > > It *keeps* complaining that it can't find Config::Std. > > > > > > > > > > > > I don't know enough of perl and of lsmb to solve this. > > > > > > But o.t.o.h. I feel it shouldn't be as hard as it is now to install > > > > > > lsmb > > > > > > in F18, should it? > > > > > > > > > > > > ario > > > > > > > > > > > > > > > > > > > > > > > > On Sun, 2013-02-03 at 11:11 +0000, ario wrote: > > > > > > > After installing the perl-Config-Std from wieers' repository, and > > > > > > > I dig > > > > > > > into some perl subdirectory, I found the following line inside > > > > > > > some > > > > > > > Config/Std/Setting (or so): > > > > > > > > > > > > > > "From cpan.org" > > > > > > > > > > > > > > That must explain why it still doesnt what it should. > > > > > > > > > > > > > > Hold on, I'm still 'playing' with: > > > > > > > > > > > > > > export PERL_MM_OPT="BASE_INSTALL=/usr/lib64/perl5"; > > > > > > > > > > > > > > in /etc/bashrc, then restart (I think with my x86_64 it should be > > > > > > > lib64, > > > > > > > no?), and > > > > > > > > > > > > > > $ sudo yum install cpan > > > > > > > > > > > > > > AND THAT is where the environment is set to /root/perl5 in > > > > > > > /root/.bashrc > > > > > > > (if one answers thoughtlessly [yes] where it asks about it. > > > > > > > I think I could type [yes] there, but then immediately have to > > > > > > > replace > > > > > > > /root/perl5 with /usr/lib64/perl5 > > > > > > > > > > > > > > correct? > > > > > > > > > > > > > > Then > > > > > > > > > > > > > > $ sudo cpan App::cpanminus > > > > > > > > > > > > > > (so the perl 'system' will take care of dependencies). > > > > > > > > > > > > > > and then the cpanm > > > > > > > > > > > > > > $ sudo cpanm Config::Std > > > > > > > > > > > > > > I'll post the result. > > > > > > > > > > > > > > > > > > > > > ario > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sun, 2013-02-03 at 01:33 -0800, Chris Travers wrote: > > > > > > > > On Sat, Feb 2, 2013 at 7:42 AM, ario > > > > > > > > <ledger-smb-us...@infopower.nl> > > > > > > > > wrote: > > > > > > > > Ok, so I got a new VM with Fedora 18 minimal install > > > > > > > > on it, > > > > > > > > and after > > > > > > > > getting a copy of ledgersmb-1.3.29-1.noarch.rpm and to > > > > > > > > prevent > > > > > > > > any > > > > > > > > mismatch with CPAN I didn't use it altogether, but > > > > > > > > instead > > > > > > > > did: > > > > > > > > > > > > > > > > > > > > > > > > Ok, so the best > > > > > > > > > > > > > > > > $ sudo yum install mlocate perl perl-Class-Std > > > > > > > > perl-ExtUtils-MakeMaker > > > > > > > > perl-Test-Base perl-Test-Pod perl-Test-Pod-Coverage tar > > > > > > > > > > > > > > > > Get repoforge's perl-Config-Std: > > > > > > > > $ curl > > > > > > > > > > > > > > > > http://apt.sw.be/source/perl-Config-Std-0.900-1.rf.src.rpm --O > > > > > > > > perl-Config-Std-0.900-1.rf.src.rpm > > > > > > > > > > > > > > > > $ rpm -Uvh perl-Config-Std-0.900-1.rf.src.rpm > > > > > > > > $ cd rpmbuild/SOURCES/ > > > > > > > > $ tar xzf Config-Std-0.900-1.tar.gz > > > > > > > > $ cd Config-Std-0.900 > > > > > > > > $ Makefile.PL > > > > > > > > $ make > > > > > > > > $ make test > > > > > > > > $ sudo make install > > > > > > > > > > > > > > > > > > > > > > > > $ cd ~ > > > > > > > > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > > > > > > > > > > > > > > > > > > > > > > > > Then, still it says: Error: ... Requires: > > > > > > > > perl-Config-Std > > > > > > > > even where '$ make test' terminated succesfully. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hmmm.... so rpm -q perl-Config-Std shows that it is installed > > > > > > > > but yum > > > > > > > > won't find it? > > > > > > > > > > > > > > > > > > > > > > > > Best Wishes, > > > > > > > > Chris Travers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Sat, 2013-02-02 at 14:04 +0000, ario wrote: > > > > > > > > > On Thu, 2013-01-31 at 00:10 -0800, Chris Travers > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Jan 30, 2013 at 9:45 AM, ario > > > > > > > > <ledger-smb-us...@infopower.nl> > > > > > > > > > > wrote: > > > > > > > > > > because I can't find it. > > > > > > > > > > > > > > > > > > > > http://ledgersmb.org/download says: Enable > > > > > > > > the > > > > > > > > EPEL > > > > > > > > > > repository, but I > > > > > > > > > > guess this only applies if one wants to > > > > > > > > install to > > > > > > > > RHEL and > > > > > > > > > > its flavors > > > > > > > > > > CentOS & Scientific Linux. > > > > > > > > > > > > > > > > > > > > Installing via cpan's cpanm results in > > > > > > > > that the > > > > > > > > module > > > > > > > > > > (perl-Config-Std) > > > > > > > > > > isn't found by the rpm. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yes, what actually happens is that it gets > > > > > > > > installed in > > > > > > > > the local root > > > > > > > > > > path. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The first thing you will have to do is get rid of > > > > > > > > it where > > > > > > > > it is > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > for example > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > printenv | grep PERL_MM_OPT > > > > > > > > > > > > > > > > > > returns an empty string > > > > > > > > > > > > > > > > > > So I thought let's install 'dag wieers' > > > > > > > > > > > > > > > > > > > > > > > > > http://pkgs.repoforge.org/perl-Config-Std/perl-Config-Std-0.900-1.rf.src.rpm > > > > > > > > > which claims to be distro-independent. > > > > > > > > > > > > > > > > > > Then > > > > > > > > > > > > > > > > > > $ sudo rpm -Uvh it, then tar xzg the > > > > > > > > perl-Config-Std-0.900.tar.gz file > > > > > > > > > > > > > > > > > > run > > > > > > > > > > > > > > > > > > $ perl Makefile.PL > > > > > > > > > $ make > > > > > > > > > $ make test > > > > > > > > > $ sudo make install > > > > > > > > > and then > > > > > > > > > $ sudo yum localinstall ledgersmb-1.3.29-1.noarch.rpm > > > > > > > > > > > > > > > > > > But still it's complaining there is no > > > > > > > > perl-Config-Std > > > > > > > > > > > > > > > > > > bummer... what now? > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then delete that directory. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Then > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > PERL_MM_OPT=INSTALL_BASE=/usr/lib/perl5 cpan > > > > > > > > Config::Std > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and the rest..... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best wishes, > > > > > > > > > > Chris Travers > > > > > > > > > > > > > > > > > > > > A 'regular' Fedora 18 rpm for > > > > > > > > perl-Config-Std > > > > > > > > doesn't show up > > > > > > > > > > in Google. > > > > > > > > > > > > > > > > > > > > Any hints? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > thanks, > > > > > > > > > > ario > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > > Everyone hates slow websites. So do we. > > > > > > > > > > Make your web apps faster with AppDynamics > > > > > > > > > > Download AppDynamics Lite for free today: > > > > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > Ledger-smb-users mailing list > > > > > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > > > > > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > > Everyone hates slow websites. So do we. > > > > > > > > > > Make your web apps faster with AppDynamics > > > > > > > > > > Download AppDynamics Lite for free today: > > > > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > > > > > _______________________________________________ > > > > > > > > Ledger-smb-users mailing list > > > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > Everyone hates slow websites. So do we. > > > > > > > > > Make your web apps faster with AppDynamics > > > > > > > > > Download AppDynamics Lite for free today: > > > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > > > > _______________________________________________ > > > > > > > > > Ledger-smb-users mailing list > > > > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > > > > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > Everyone hates slow websites. So do we. > > > > > > > > Make your web apps faster with AppDynamics > > > > > > > > Download AppDynamics Lite for free today: > > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > > > _______________________________________________ > > > > > > > > Ledger-smb-users mailing list > > > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > Everyone hates slow websites. So do we. > > > > > > > > Make your web apps faster with AppDynamics > > > > > > > > Download AppDynamics Lite for free today: > > > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > > > _______________________________________________ > > > > > > > > Ledger-smb-users mailing list > > > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > ------------------------------------------------------------------------------ > > > > > > Everyone hates slow websites. So do we. > > > > > > Make your web apps faster with AppDynamics > > > > > > Download AppDynamics Lite for free today: > > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > > _______________________________________________ > > > > > > Ledger-smb-users mailing list > > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > Everyone hates slow websites. So do we. > > > > > Make your web apps faster with AppDynamics > > > > > Download AppDynamics Lite for free today: > > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > > _______________________________________________ > > > > > Ledger-smb-users mailing list > > > > > Ledger-smb-users@lists.sourceforge.net > > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > > ------------------------------------------------------------------------------ > > > > Everyone hates slow websites. So do we. > > > > Make your web apps faster with AppDynamics > > > > Download AppDynamics Lite for free today: > > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > > _______________________________________________ > > > > Ledger-smb-users mailing list > > > > Ledger-smb-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > > ------------------------------------------------------------------------------ > > > Everyone hates slow websites. So do we. > > > Make your web apps faster with AppDynamics > > > Download AppDynamics Lite for free today: > > > http://p.sf.net/sfu/appdyn_d2d_jan > > > _______________________________________________ Ledger-smb-users mailing > > > list Ledger-smb-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_jan > > _______________________________________________ > > Ledger-smb-users mailing list > > Ledger-smb-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users > > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_jan > _______________________________________________ Ledger-smb-users mailing list > Ledger-smb-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ledger-smb-users ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Ledger-smb-users mailing list Ledger-smb-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ledger-smb-users
