Hello Roger If you are talking about an elliptical turning jig like what an Ornamental lathe dose, Ive been working on this idea for a number of years. (Here is a good video on this topic. https://www.youtube.com/watch?v=xAoM-CRZBNY ) But sadly I have not been able so far to get the same type of attachment to work on my Legacy. But having said that, I have found out a number of different ways to make elliptical turnings using the Legacy in the past. So you have stated, templates work well on the Legacy, (form both the template follower, and well as using a template following router bit and using the Legacy like a Pin router...) ( https://www.youtube.com/watch?v=K9D_AzR1Hcs like this video dose.) I wish you luck on this project. Please let us know your project turns out. C.A.G. ----- Original Message -----
From: "Bawdsey 64" <rhp...@gmail.com> To: legacy-Ornamental-Mills@googlegroups.com Sent: Thursday, October 13, 2016 4:35:27 AM Subject: Producing an ellipse ​Has any one in the group any suggestions for producing an ellipse on a flat board WITHOUT USING A TEMPLATE OR DOING IT FREEHAND. Basically what I am hoping to locate is a jig idea or a stroke of genius. What I am planning to make is a jewellery box with an ellipse shaped lid or some form of ellipse shaped design feature. The ellipse will be around 9" by 6" and I will be using my recently acquired Model 900. Yes I finally got a Model 900, not bad considering that in my time as Legacy's agent here in Europe I sold over 100 manual machines and a number of CNC. I found that when I was running my business that I never had time to pursue woodworking as a hobby. Then in my first couple of years of retirement that I also never had time due to moving house and then getting a workshop and sorting out the garden. But now I am hoping to use this Legacy and get back to woodturning. Cheers Roger -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.