Nice! ;-)
C.A.G.
On Sunday, November 28, 2021, 10:52:14 PM EST, Tim Ziegler
<timjzieg...@gmail.com> wrote:
Not a lot of progress but at least I had it fired up lol
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Sun, Nov 28, 2021 at 5:43 PM Okla Mike (Liltwisted) <legacym...@iglide.net>
wrote:
Welcome to the group Jeff. I'm with you on the smell of burnt ............ I
don't like it at all. Air exchange as well as a good filtered mask is a must.
The Wood Chuck in the picture has one very important mod that was made by the
owner. He took the 1 X 2 steel rail off the front and replaced it with a 2 X 2
That I am sure helped with a lot of the sway that would turn up in the big
bladed cuts. The next model after the wood chuck was the Steely as we call
them. They used square galvanized tubes to add strength. I still use my
Woodchuck because I can do a lot more in the way of modifications when the
center points are raised and not trapped between rails. I have done 15 foot
posts and table bases with a diameter of 25" All the way down to roping a tooth
pick. Welcome to the group that does not accept "limitations"
Mike OK
On 11/28/2021 7:01 AM, Jeff Richmond wrote:
Hello Everyone,
I recently joined this group in late October as a fellow owner of a Legacy
Ornamental Mill with the hopes of learning more about this tool and its
capabilities. Thanks in advance to everyone for sharing offering your
experiences and helpful tips that a user group like this provides.
To add a little input to the recent group conversations
Bone Turning, I have turned some deer antler pens upon request which were
well seasoned (dry) but there was a distinct smell like burnt skin / fingernail
during the process. They came out well but it is not a medium I prefer to focus
on.
Lookout for used mills: I am always on the lookout for parts and accessories
for my mill as I am sure most of you are. I do not need another (at least that
what I have to keep telling myself) but in my searching, I did bump into this
one if anyone wants to expand their capability. It is a little older but it
appears to have a variety of gears as well as the manuals and instructional
videos ( including a VHS player ) Legacy ( Woodchuck ) Ornamental Mill - tools
- by owner - sale (craigslist.org)
Jeff from Connecticut --
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/a51bb0f7-e2d4-4807-a659-4fe94a77494fn%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/2500cdb0-a0a7-37d5-5982-2b7404a79f3f%40iglide.net.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH9wjHw38-JDKQFDiUNz%2B-ujs%2Bgm70w-VQt%2BP0SfbQcUA%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/767293021.1533375.1638158226488%40mail.yahoo.com.
