Date: Sat, 22 Apr 2000 21:39:44 -0400
From: "Lawrence Young" <[EMAIL PROTECTED]>
Subject: Re: new to list
----- Original Message -----
From: "Paul Davila" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Saturday, April 22, 2000 7:58 PM
Subject: RE: new to list
> Date: Sat, 22 Apr 2000 19:58:04 -0700
> From: "Paul Davila" <[EMAIL PROTECTED]>
> Subject: RE: new to list
>
> I can't copy the setup files to the disk after doing an fdisk and format
> because I can no longer access the drive (no windows). Is there a dos
driver
> for the pcmcia slot so it can be reconized in dos mode.???
>
Do it before while you're in your current version of windows.
Unless your PCMCIA CD-ROM is one of those special one that comes with
special PCMCIA DOS driver, you will have to locate a DOS PCMCIA card service
(you may have to buy it if you can still find it) and you also need DOS
driver for your CD-ROM drive. Good luck.
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
