Date: Mon, 19 Jun 2000 06:49:49 PDT
From: "neil barnes" <[EMAIL PROTECTED]>
Subject: Re: L50: Trouble with 6GB drive. BIOS-related?

The dos scandisk has always been dreadfully slow on the 50 - I got so bored 
with it I turned it off (and I'm damned if I can remember where but I think 
it was in windows.sys - someone will no doubt correct me) and check it with 
the windows version. That's still quite slow but the file system check - as 
opposed to the surface scan - isn't too bad...

Neil


>From: "Eiren K. Smith" <[EMAIL PROTECTED]>
>Reply-To: Libretto <[EMAIL PROTECTED]>
>To: Libretto <[EMAIL PROTECTED]>
>Subject: Re: L50: Trouble with 6GB drive. BIOS-related?
>Date: Mon, 19 Jun 2000 06:10:57 -0700
>
>Date: Mon, 19 Jun 2000 08:59:06 -0400
>From: "Eiren K. Smith" <[EMAIL PROTECTED]>
>Subject: Re: L50: Trouble with 6GB drive. BIOS-related?
>
>Yes, but this was a scandisk at boot time (text mode) due to not shutting
>down properly.  Still true?
>
>-e.
>
>
>-----Original Message-----
>From: David Chien <[EMAIL PROTECTED]>
>To: Libretto <[EMAIL PROTECTED]>
>Date: Sunday, June 18, 2000 2:40 PM
>Subject: Re: L50: Trouble with 6GB drive. BIOS-related?
>
>
> >Date: Sun, 18 Jun 2000 11:36:53 -0700 (PDT)
> >From: David Chien <[EMAIL PROTECTED]>
> >Subject: Re: L50: Trouble with 6GB drive. BIOS-related?
> >
> >> errors, Scandisk gets to 85% of the 4GB partition and then slows to a
>crawl.
> >
> >  If you're doing a thorough scandisk, then it will scan the directory
> >structure for errors first, then go on to a sector-by-sector check of the
> >entire HD (slow).
> >
> >  Simply don't run a thorough scandisk unless you need to and it'll go
>faster.
> >
> >  d =)


________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com




**************************************************************
http://libretto.basiclink.com - Libretto mailing list                
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ         
                 -------UNSUBSCRIBE-------                            
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe 
            --------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...                           
**************************************************************

Reply via email to