Date: Mon, 2 Oct 2000 11:28:35 +0900
From: Vitaly Pavlenko <[EMAIL PROTECTED]>
Subject: Re: Speaker
Hi!
> Date: Fri, 22 Sep 2000 10:56:52 -0700 (PDT)
> From: David Chien <[EMAIL PROTECTED]>
> Unfortunately, there is no way for audio info to be transmitted into
> the L50 over the parallel/serial/PCMCIA ports from the CD-ROM. On desktops,
> it is transmitted by the analog/digital audio cables into the sound card,
> either by seperate cables or over the IDE cable digitally. No such thing over
> the PCMCIA/etc. connectors as far as I know of....
In fact, it's easy, at least under Win95/98. Bus/interface doesn't really matter
(well, not sure about parallel, serial is way too slow) , but it takes a CD-ROM drive
capable of a very good rip (digital audio extraction).
I have never managed to get native Win98 digital transfer enabled without USB
sound-box, thus my way was to replace CDFS.vxd with this:
http://www.th-zwickau.de/%7Emaz/archives/cdfs.zip, description is at the bottom of:
http://www.th-zwickau.de/%7Emaz/cd-rippers.html
I want to warn you once again - it doesn't work with every drive. Personally tested
this on my Lib1000SS with Panasonic KXL-RW10AN portable burner. Works.
Best regards,
Vitaly
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
