Date: Tue, 28 Aug 2001 08:14:18 +0200
From: "Alexandre Kaoukhov" <[EMAIL PROTECTED]>
Subject: RE: A PCMCIA funny one..
I do not think this is profile issue. I had the same proble when
changing slot in Libby. I have 3COM combo Type II card.
> -----Original Message-----
> From: Fran [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 27, 2001 10:11 PM
> To: Libretto
> Subject: Re: A PCMCIA funny one..
>
>
> Date: Tue, 28 Aug 2001 08:08:07 +1200
> From: Fran <[EMAIL PROTECTED]>
> Subject: Re: A PCMCIA funny one..
>
> You need to play with hardware profiles.
>
> Fran
> :):):)
>
> On Tue, 28 Aug 2001 04:15, you wrote:
> > Date: Mon, 27 Aug 2001 17:13:09 +0100
> > From: "Jon Crawford" <[EMAIL PROTECTED]>
> > Subject: A PCMCIA funny one..
> >
> > Hi
> >
> > I've just brought an Intel combo 56k modem/network card and
> it works
> > fine in my 110CT - its a Cardbus Type III card so it uses both
> > cardslots. When I take the card out and place it in my type III
> > cardstation slot, the modem part of the card reinstalls itself as a
> > "Intel xxxx modem #2". This modem I have to use when the
> card is in a
> > cardstation slot, otherwise I use the "Intel xxxx modem"
> when its in
> > the Libby. Strangely enough the network driver works fine
> when docked
> > and undocked.
> >
> > The modem driver's are configured to exist in all profiles, and I'm
> > running Win98SE.
> >
> > Any ideas?
> >
> > Whilst on the subject of cardstation / docked Libby's, does anyone
> > else have a problem with the USB on the cardstation? To make the
> > Libby set any device plugged in the cardstation I have to boot the
> > Libby, unplug and then plug the USB in again. This was before I
> > brought a Belkin cardbus USB adaptor - this works fine whatever.
> >
> > Jon
> >
> >
> >
> > **************************************************************
> > http://libretto.basiclink.com - Libretto mailing list
> > http://libretto.basiclink.com/archive - Archives
> > http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> > -------UNSUBSCRIBE-------
> > mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> > --------UNSUBSCRIBE DIGEST------
> > Use above but add DIGEST to the subject line...
> > **************************************************************
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ
> -------UNSUBSCRIBE-------
> mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
> --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line...
>
> **************************************************************
>
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
