Date: Mon, 1 Oct 2001 17:38:31 -0600 (MDT) From: Tom Dixon <[EMAIL PROTECTED]> Subject: Re: Woohoo
I use a D-Link card under openbsd which works great. I also use that card with Linux, just not on my libby. I have no doubts it would work though. Got the d-link at c4sure.com for $80 a while back. 802.11b -tom On Sun, 30 Sep 2001, Jason Kim wrote: > Date: Sun, 30 Sep 2001 00:37:40 -0700 > From: "Jason Kim" <[EMAIL PROTECTED]> > Subject: Re: Woohoo > > How much did it cost you? The WaveLAN's and the Netgear cards both are > around $99, and they're supported under Linux (very important to me) ... now > I'm just waiting for my next paycheck. ;) > > -Jason > > > ----- Original Message ----- > From: "David VanHorn" <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Saturday, September 29, 2001 11:46 PM > Subject: Woohoo > > > > Date: Sun, 30 Sep 2001 01:38:45 -0500 > > From: David VanHorn <[EMAIL PROTECTED]> > > Subject: Woohoo > > > > > > I finally joined the wireless clan. > > Linksys PC card and WAP/Router > > > > This works great! haven't figured the encryption yet, but I'm not too > worried. > > That's a tomorrow project. > > > > Got it running on my L1, I'll try it on the L50 next. :) > > -- > > Dave's Engineering Page: http://www.dvanhorn.org > > > > Got a need to read Bar codes? http://www.barcodechip.com > > Bi-directional read of UPC-A, UPC-E, EAN-8, EAN-13, JAN, and Bookland, > with > > two or five digit supplemental codes, in an 8 pin chip, with NO external > parts. > > > > > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://libretto.basiclink.com/archive - Archives > > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
