Date: Wed, 03 Oct 2001 19:23:55 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: 70CT working now! & Speaker issue
>From: "neil barnes" <[EMAIL PROTECTED]> > >btw - anyone else here with a 70 mobo in a 50 case? I found I had to file >around 1mm of housing away around the docking connector, which seems to be >a slightly different design (?) > >Neil Neil, I had similar problems when I was swapping top ends between the 50CT and 70CT. By mistake I grabbed a couple parts I had laid out from one, and started putting in the other. The ribbon from the keyboard, I think it was the one from the 70CT, was too wide to get into the slot on the 50T. I would have to had trim that to get it in. A couple weeks back, I put a cover for one HDD slot onto the other case. It sat at a little bit of angle, and not squarely for a good fit. Another thing that's either different or worn on the 50CT is the right lid hinge. I've noticed that the fit had been really sloppy, and I can move the lid up and down a bit in the hinge socket (..this was one of the original line of 50CTs with the serial mouse problem.. so maybe more things were improved later). The first thing I noticed about the 70CT when I got it fired up was how tight the fit is on its lid hinges. Shel _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
