Date: Thu, 24 Jan 2002 00:44:22 +0000
From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] 70CT and Win2k

I'm amazed you got Win2000 working on your L70.  I was under the impression 
the L70 wouldn't power it.  Did you have to pare the installed list of 
components down a bit that you selected to install?

Has anyone else been sucessful at installing Win2000 on a L70?

Matt


>Date: Wed, 23 Jan 2002 23:19:16 -0000
>From: "Adam McQueen" <[EMAIL PROTECTED]>
>
>
> > What seems to be the issue... is it failng to boot, or is the > display
> > corrupting?
> > Does w2k boot with the standard VGA drivers? do they corrupt?
>
>It runs with the std VGA driver, and when I set it to the 65550 driver
>(either W2k or the C&T one) it goes thru the motions of installing, but the
>device shows up with the yellow exclamation mark in device manager, and in 
>display properties it still has the VGA (SVGA?) driver as the current 
>display driver. This is the case after rebooting too.
>
>The system works fine with the VGA driver, except only in 16 colours. No 
>corruption, no boot failures, nothing. In fact, 2k boots quicker than 98, 
>both clean installs.
>
>I was pleaseantly surprised at the speed to be honest, even given the 
>32mb,it is quite usable (with patience, obviously!).
>
>Anyone any ideas?
>
>
>Adam
>


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to