Date: Tue, 29 Jan 2002 02:00:51 EST From: [EMAIL PROTECTED] Subject: Re: [LIB] OT, power adapter question
Raymond, I mistakenly typed Libretto Portege instead of Toshiba Portege. The power adapter for my Lib50 looks identical and has the same volt and current rating. It just has a coaxial plug on the end instead of the square, two pin plug. I am looking for an adapter with the two pin end or simply the two pin end to graft to my DC adapter. I was not aware the later Libs used the same two pin connector. (yes, the PA2501U is what I was thinking about). Anyone have a PA2501U (working or not) with the two pin end or the equivalent DC adapter I can buy inexpensively? Xin is very good, but I don't want to "try this trick at home". I fear I would reverse the polarity and ruin my nice laptop. Thanks Dennis > > I'm assuming you mean the AC adapter for the L100/L110 (ie. the PA2501UE)? > The L50/L70 use the PA2500UE which I believe is quite incompatible. > > The reason I make the distinction is because both the L100/L110 and the > Portege 3110CT use a small square plug to make the power connection - I'm > surprised you can't get the Libretto 100/110 adapter fitting into the Portege. > If you're CERTAIN the voltage is correct, perhaps http://www.fixup.net/tips/ > l100/l100plug.htm might be able to give you some ideas ... ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
