Date: Tue, 29 Jan 2002 07:24:08 -0500 From: "Grebe, Dave" <[EMAIL PROTECTED]> Subject: RE: [LIB] OT, power adapter question
Unclear on what exactly you're looking for, but if anyone is looking for a power supply I have a brand new never used 15 volt 4 amp power supply model number ZVC60NT15E. You can read the spec at http://www.eoscorp.com/products/specs/PowerZVC.pdf I would be willing to part with for $35. Then all you would need is an adapter from Radio Shack Cat No. 274-1572A (coaxial power plug 6.3mm O.D. 3.0mm I.D) to fit a Libretto 50/70. This is what I use for my L70. Anyone have a old battery pack they don't want? I would like to replace the batteries inside by experimenting on an old pack Thanx Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 29, 2002 2:07 AM To: Libretto Subject: Re: [LIB] OT, power adapter question Date: Tue, 29 Jan 2002 02:00:51 EST From: [EMAIL PROTECTED] Subject: Re: [LIB] OT, power adapter question Raymond, I mistakenly typed Libretto Portege instead of Toshiba Portege. The power adapter for my Lib50 looks identical and has the same volt and current rating. It just has a coaxial plug on the end instead of the square, two pin plug. I am looking for an adapter with the two pin end or simply the two pin end to graft to my DC adapter. I was not aware the later Libs used the same two pin connector. (yes, the PA2501U is what I was thinking about). Anyone have a PA2501U (working or not) with the two pin end or the equivalent DC adapter I can buy inexpensively? Xin is very good, but I don't want to "try this trick at home". I fear I would reverse the polarity and ruin my nice laptop. Thanks Dennis > > I'm assuming you mean the AC adapter for the L100/L110 (ie. the > PA2501UE)? > The L50/L70 use the PA2500UE which I believe is quite incompatible. > > The reason I make the distinction is because both the L100/L110 and > the > Portege 3110CT use a small square plug to make the power connection - I'm > surprised you can't get the Libretto 100/110 adapter fitting into the Portege. > If you're CERTAIN the voltage is correct, perhaps http://www.fixup.net/tips/ > l100/l100plug.htm might be able to give you some ideas ... ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
