Date: Mon, 11 Feb 2002 18:36:29 +0800 From: Raymond <[EMAIL PROTECTED]> Subject: Re: [LIB] Red Hat Linux on the L50
At 06:01 PM 10/02/2002 -0800, you wrote: >Date: Sun, 10 Feb 2002 17:53:22 -0800 >From: Skip Carter <[EMAIL PROTECTED]> >Subject: Re: [LIB] Red Hat Linux on the L50 > > >> Date: Sun, 10 Feb 2002 23:20:50 +0800 >> From: Raymond <[EMAIL PROTECTED]> >> Subject: Red Hat Linux on the L50 >> >> OK I know this has been covered before but for some reason, I can't find any >>ACTIVE servers from which I can download the patch to activate the floppy >> diskette drive ... > >There is a copy on my FTP server: > > ftp://ftp.taygeta.com/pub/Linux/Libretto/floppy_cs-202.tar.gz tnx for that :-) >>Also, I'm probably looking in the wrong places but I'm having one hellava time >> trying to figure out how to get Linux to detect my PCMCIA network card (a Bromax >>iPort 10/100 NIC, NE2000 compatible) > > Is the card insertion detected ? If so, what does the syslog say > afterwards ? well when I execute "cardctl ident", it can see that there is an NE2000 compatible adapter that has been inserted but I can't figure out how to make it appear as eth0 or whatever nor can I figure out how to stop and start the cards ... I'll be stuffing around in the kernel in a little while to see if I can get the fdd working, I've heard that perhaps the kernel doesn't have support for the NIC yet so I'll check for that whilst I'm there ... - Raymond --- /~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\ | | "Does fuzzy logic tickle?" | | ___ | "My HDD has no reverse. How do I backup?" | | /__/ +-------------------------------------------| | / \ a y b o t | [EMAIL PROTECTED] | | | HTTP://www.raybot.net | | ICQ: 31756092 | Need help? Visit #Windows98 on DALNet! | \~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/ ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
