Date: Tue, 12 Feb 2002 14:29:06 +0100 From: Christian Gennerat <[EMAIL PROTECTED]> Subject: Re: [LIB] Red Hat Linux on the L50
> Raymond a �crit : > OK I've been stuffing around and, at a variety of times got a single low beep, a >high beep followed by a low beep and 2 high beeps. None of them gave me access to the >network or link lights however ... I've tried recompiling the PCMCIA module without >luck (in fact it went and got rid of my pcmcia.conf which sorta annoyed me a bit). >How would I go about reinstalling PCMCIA support from scratch? I can't find any >mention of pcmcia when I do 'make menuconfig' within the linux source ... Look in "General Setup" > > > the NEXT question is how the heck do I get floppy support going? I've extracted the >floppy patch to /usr/src/linux/pcmcia-cs-3.1.8 and executed 'cat >pcmcia-cs-3.1.8/modules/patches/floppy22.E.fix | patch -p0' but I can't figure out >how to enable PCMCIA support as a module ... I can't find any mention of it in 'make >menuconfig'. > 2nd line in "Block devices" when patch is applied ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
