Date: Fri, 26 Apr 2002 11:03:19 -0500 From: "John Musielewicz" <[EMAIL PROTECTED]> Subject: Re: [LIB] 70CT verses 100CT
----- Original Message ----- To: "Libretto" <[EMAIL PROTECTED]> Sent: Friday, April 26, 2002 1:26 AM Subject: Re: [LIB] 70CT verses 100CT > Date: Fri, 26 Apr 2002 09:24:49 -0400 > From: "Lawrence Young" <[EMAIL PROTECTED]> > Subject: Re: [LIB] 70CT verses 100CT > > The major difference is the internal design. 50 and 70 are basically 486 > architecture while 100 are Pentium class architecture. This can be show in > many cases: > > (1) When put in standby or suspend mode, L50/70 will drain the battery in > couple of hours while on L100, it is almost the same as shutdown or > hibernation. Wow...cool. I'm getting one. :) > > (2) L50/70 only has ISA bus so it won't support 32-bit card bus and USB > interface. L100 has modern PCI bus. > This would be nice to have so a person could add a usb pcmcia card. > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: "Libretto" <[EMAIL PROTECTED]> > Sent: Thursday, April 25, 2002 11:01 PM > Subject: [LIB] 70CT verses 100CT > > > > Date: Thu, 25 Apr 2002 21:59:42 -0500 > > From: [EMAIL PROTECTED] > > Subject: 70CT verses 100CT > > > > > > I am still working on my &*(^%& 70CT and its rebooting problem. > > Basically I am thinking of selling it as spare parts and getting a 100 > > or 110CT. I was wondering- what are the main differances besides > > the 70 and 100/110 besides things like the cardbus enabled > > pcmcia, larger screen, more memory and faster microprocessor? > > Like- what are the differances between the power supplies used by > > each? I saw from the specs they use the same voltage and current > > but do the have differant jacks and/or polarity? Does the 100/110 > > use the same floppy drive as the 70? I understand either the 100 or > > the 110 has a 8 mm hard drive which is it and can a 9.5 mm hard > > drive be made to fit? Will the port expander work from the 70 to > > 100/110? Basically I'm thinking of getting a barebones 100/100CT > > and using everything from my 70CT. Thanks in advance... > > > > > > John > > > > > > > > ************************************************************** > > http://libretto.basiclink.com - Libretto mailing list > > http://www.silverace.com/libretto/ - Archives > > > > -------TO UNSUBSCRIBE------- > > Reply to any of the list messages. The reply mail should be > > addressed to: [EMAIL PROTECTED] - Then replace any text > > on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > > Do above but with this on subject line: cmd:unsubscribe digest > > ************************************************************** > > > > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************