Date: Mon, 13 May 2002 10:27:08 +0200 From: Christian Gennerat <[EMAIL PROTECTED]> Subject: Re: [LIB] Non standard i/o port
Raymond a �crit : > > > > >I found a port which seems to give some indication of the hardware > > > >status of the 70CT. It is 00eeh. At least bit 11 goes high when the > > > >AC is connected and goes low when it is disconnected. Does > > > >anyone know what the rest of the bits indicate? I am searching for > > > >the port which turns the backlight on and off. > > > > > > You might find the docs at http://www.buzzard.org.uk/toshiba/docs.html of > > > use. > Not only doc. Also a driver and utilities (for linux) > > >I already saw the HCI one and I found the 70/50 doesn't have it. Its too ?? > > >bad because > >the hibernation test might help with hibernation problems. Has anyone > >tested it on a > >100/110? The System Manager one is new to me. I knew it is built into the > >pentium > >but hadn't worked out how to access it yet. I think I might have found the > >ports for > >the display and backlight. Am leary to test them though since I hate > >plugging values You can turn display bright, dark, or off on L50, L100, L110 (I have tested it) and on L70 (I presume) > > > I do know that between the L100/110 era and more recent laptops, Toshiba > changed a pile of stuff for power management. For instance, newer laptops > hibernate to a file on the file system called toshiber.sys (I think its > .sys anyway) and you can delete that file whenever you like, when it > hibernates it'll recreate it on the file system where there is room without > blowing away stuff. > Not found this on L110 And this suppose a greater interaction between the BIOS and one dedicated OS Which OS ? ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
