Date: Thu, 27 Jun 2002 03:34:46 +0800 From: <[EMAIL PROTECTED]> Subject: Re: [LIB] L50 & USB?
> It might be possible but a driver wold have to be written. > The 16 bit bus would have to be doubled in software to 32 bits. > Its done sometimes with an 8 bit bus to get 16 bits and seems to > work on 16 bit cards. Donno if it'll work for cardbus. Depends > on if the actual pinout is differant on a cardbus and 16 bit slot. > But as far as I know it isn't since the pcmcia revisions have all > been in software since about 2.0 No personal experience of this, but I seem to remember reading somewhere that a PCMCIA card into PCcard slot will (always) go (ie a PCcard slot is 100% backward compatible); a PCcard into PCMCIA slot won't go (ie if it's a specifically PCcard-only card, it can/will be keyed so that it cannot physically get into a PCMCIA slot) - the voltage(s) are (detected) different(ly)? ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
