From: "Matthew Hanson" <[EMAIL PROTECTED]>
Subject: Re: [LIB] HD upgrade
If the HDD is 9.5mm (9.2, 9.4?? I think that's the minimum size for all large drives these days), then yes. You'll need to remove the spacers to get it to fit in a 50CT. You'll also need drive overlay software to deal with the 8MB BIOS boundry problem, and you'll have to set up a small partition at that boundry to deal with the Windows swap file issue. You can find the details on the process in many posts by searching the archives here, http://www.technoir.nu/libretto/list/ or here, http://www.mail-archive.com/[email protected]/ ... unless someone wants to run through it all again.
You'll need the EZBIOS overlay software. I think someone had it posted somewhere. I can send it to you iff you need.
Matt
From: Oliver Chua <[EMAIL PROTECTED]> Hi Everyone,I'm new here and a very proud owner for many years of my Libretto 50CT. However, the original hard drive is completely full to the max already. I would like to know if I could upgrade the hard drive using a Fujitsu 20 gig MHN2200AT replacement? Do I have to remove the plastic spacers? Will I be able to use all the 20gig capacity (I recall a 8 gig limit or something)? I don't mind partitioning the drive. I have no other choice since the Toshiba laptop hard drives are not available in my area. Many thanks in advance, Oliver
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives
-------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
--------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************
