Date: Mon, 22 Sep 2003 20:08:43 EDT From: [EMAIL PROTECTED] Subject: Re: [LIB] How do I load windows 98 on a libretto 70ct
Thank you for responding to my questions... I am going to try and do what you have typed.. and see if that works, kinda scared to do anything to a "WORKING LAPTOP" but the AOL is starting to act up and I need to get a CD driver or something to get the CD drive to work. I'll keep you posted.. Has anyone had PROBLEMS installing 98se on a 70CT? thanks SAM > Subj: Re: [LIB] How do I load windows 98 on a libretto 70ct > Date: 9/22/2003 1:40:50 AM Central Daylight Time > From: <A HREF="mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A> > Reply-to: <A HREF="mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A> > To: <A HREF="mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</A> > Sent from the Internet > > > > Date: Mon, 22 Sep 2003 15:39:49 +0900 > From: "Lee Phlegar" <[EMAIL PROTECTED]> > Subject: Re: [LIB] How do I load windows 98 on a libretto 70ct > > Sam, > > The 1st thing that you need to do is to get your CD Player working. The > driver might be corrupted or Missing or maybe you have an interrupt > conflict. To check the device driver click on Start/Control > Panel/System/Devices. Look for your Panasonic CD Player. If the player is > not listed you probably do not have the device driver loaded. Missing might > > also be caused by your PCMCIA software not working correctly. If you see > the CD player in the device window you should open the device (icon) and > check if the device is working correctly. The steps that I just mentioned > only takes a few seconds. If all else fails reinstall the drivers for the > CD player! If that doesn't work replace the CD Player. > > To install 98se you will need to have the CD player functioning. If the CD > player is working and if the PC has already booted, just insert the 98se CD > and follow the prompts (this will perform an UPGRADE). I would also suggest > > that you need to research the WEB for any additional drivers that might be > needed BEFORE you do the upgrade. GOOD LUCK!! > > PS If you have the ability to connect the Libretto to another PC (peer to > peer) you can always copy the entire contents of the 98se CD to the HD of > the Libretto and then execute SETUP.EXE (provided you have enough free > space). > > Lee > > Tokyo, Japan > > > >From: [EMAIL PROTECTED] > >Reply-To: Libretto <[EMAIL PROTECTED]> > >To: Libretto <[EMAIL PROTECTED]> > >Subject: [LIB] How do I load windows 98 on a libretto 70ct > >Date: Sun, 21 Sep 2003 17:55:14 -0700 > > > >Date: Sun, 21 Sep 2003 20:49:14 EDT > >From: [EMAIL PROTECTED] > >Subject: How do I load windows 98 on a libretto 70ct > > > >I have a libretto ct that still has 95 on it, i have the disk for windows > >98 > >se full edition. I want to load it on. I have a panasonic cd pcmcia and > >the > >libretto wont' recognize it anymore.. wonder if the driver is bad.. > >can anyone tell me how to load it on? do i have to reformat? or can i load > >it > >over the 95? > >thanks > >SAM > > > > > > > >************************************************************** > >http://libretto.basiclink.com - Libretto mailing list > >http://www.silverace.com/libretto/ - Archives > > > > -------TO UNSUBSCRIBE------- > >Reply to any of the list messages. The reply mail should be > >addressed to: [EMAIL PROTECTED] - Then replace any text > >on the message's subject line: cmd:unsubscribe > > --------TO UNSUBSCRIBE DIGEST------ > >Do above but with this on subject line: cmd:unsubscribe digest > >************************************************************** > > _________________________________________________________________ > MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. > http://join.msn.com/?page=features/virus > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
