Date: Tue, 30 Dec 2003 22:15:31 -0800 (PST)
From: John Musielewicz <[EMAIL PROTECTED]>
Subject: Re: [LIB] Slackware 8

Actually Boot Magic doesn't work with all OSes. I've
had trouble booting both PTSDOS and Linux with it.
Both were installed correctly yet Boot Magic would not
boot them. Otherwise the Partition Magic package is
wonderful. 

John
[EMAIL PROTECTED]

--- David Chien <[EMAIL PROTECTED]> wrote:
> Date: Mon, 29 Dec 2003 22:31:42 -0800 (PST)
> From: David Chien <[EMAIL PROTECTED]>
> Subject: Re: [LIB] Slackware 8
> 
> Or basically, have Partition Magic do a wizard for a
> Linux install, and off you
> go.  Or many other ways.  No need to worry too much
> about which boot manager
> will take control at startup: Boot Magic, XOSL,
> Linux loaders all do the same
> thing for most people, and they all work with all
> OSs.
> 
>   If you've already use Partition Magic in Windows,
> Boot Magic is the way to go
> - easy and already comes with it. Wizards help you
> through the process.
> 
>   If you load up more than the standard 3 Primary
> partitions standard
> DOS/Windows boot loaders handle, then XOSL is a
> great way to go - you can stick
> in truck loads more OSs.  Free, even.  And the only
> one that can be 'modified'
> to work with Disk Manager programs such as EZ-Drive.
> 
>   Linux loader if you know linux and don't worry
> about futzing around with the
> interface when adding/deleting OSs and don't need
> handholding or more than the
> usual number of OSs installed.
> 
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/
> 
> 
> 
>
**************************************************************
> http://libretto.basiclink.com - Libretto mailing
> list
> http://www.silverace.com/libretto/ - Archives
> 
>                  -------TO UNSUBSCRIBE-------
> Reply to any of the list messages. The reply mail
> should be
> addressed to: [EMAIL PROTECTED] - Then replace
> any text
> on the message's subject line: cmd:unsubscribe
>               --------TO UNSUBSCRIBE DIGEST------
> Do above but with this on subject line:
> cmd:unsubscribe digest
>
**************************************************************
> 




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to