Ah, so the errors were connected after all. I was curious about the 
checksum, but I didn't realize that would make it grab an earlier version.

Derek Chen-Becker wrote:
> OK, I think I've found an issue here. The sha1 checksum file for the 
> archetype was last updated on August 1st, and haven't been updated since 
> then. That's what your original error was, and it's why it's grabbing an 
> older version of the jar :(. Let me see if I can figure out why hudson 
> won't recalculate the checksums.
> 
> Derek
> 
> On Mon, Aug 24, 2009 at 2:13 PM, Charles F. Munat <c...@munat.com 
> <mailto:c...@munat.com>> wrote:
> 
> 
>     Thanks for all your help, Indrajit. I'm using the blank JPA app anyway,
>     so it didn't affect me, but I thought Derek, et al should know.
>     Especially since I was using the Maven command from his book...
> 
>     Chas.
> 
>     Indrajit Raychaudhuri wrote:
>      > Chas,
>      >
>      > The problem is quite likely with the archetype jar in the scala-tools
>      > repo. Derek is probably looking into it.
>      > Yes, your being confused about the master reference is
>      > understandable :)
>      >
>      > Good that it compiles through. For now, you can set the dependencies
>      > to lift-core and lift-jpa to 1.1-M4 and proceed merrily.
>      >
>      > Cheers, Indrajit
>      >
>      > On Aug 24, 11:09 pm, "Charles F. Munat" <c...@munat.com
>     <mailto:c...@munat.com>> wrote:
>      >> I'm on a new laptop. I didn't do any git pulls of Lift stuff. I just
>      >> installed Scala with the IZ installer and then Maven, then I ran the
>      >> archetype command to create a basic JPA app and let it build the m2
>      >> repository on my machine. When that didn't work, I blew away m2 and
>      >> tried it again.
>      >>
>      >> Changing the lift-core dependency worked. So the problem is
>     definitely
>      >> with 1.1-SNAPSHOT -- at least the one I ended up with.
>      >>
>      >> Does this make sense? Do you see why I was confused by your
>     reference to
>      >> master?
>      >>
>      >> Chas.
>      >>
>      >> marius d. wrote:
>      >>> What I means is if you did a git pull from git master and ran mvn
>      >>> clean:clean install. That inherently means version 1.1-SNAPSHOT
>      >>> Br's,
>      >>> marius
>      >>> On Aug 24, 11:49 am, "Charles F. Munat" <c...@munat.com
>     <mailto:c...@munat.com>> wrote:
>      >>>> Hi, Marius...
>      >>>> I don't know what you mean by "Are you using master?" What I
>     did was use
>      >>>> the Maven archetype to create a basic JPA lift app. Then I changed
>      >>>> directory to the top directory and ran "mvn compile." That's
>     it. I got
>      >>>> the errors you see. I didn't do anything else.
>      >>>> I've tried blowing away .m2 and I've tried changing the scala
>     version to
>      >>>> 2.7.5 (from 2.7.4). No difference.
>      >>>> Does the basic JPA lift app not compile until you do something
>     else to
>      >>>> it? The blank one worked fine. Can you create and compile the
>     Basic JPA
>      >>>> app on your machine without error? Maybe it's something on my
>     machine,
>      >>>> but everything else is working fine.
>      >>>> The Maven command I used is reproduced below.
>      >>>> Chas.
>      >>>> marius d. wrote:
>      >>>>> Charles,
>      >>>>> AFAIK I removed all dependencies to javax.servlet.* classes
>     even from
>      >>>>> archetypes.  Are you using master? ... I did a full search
>     and servlet
>      >>>>> things are not being used. The archetype looks ok to me ... Am I
>      >>>>> missing something?
>      >>>>> Br's,
>      >>>>> Marius
>      >>>>> On Aug 24, 9:06 am, "Charles F. Munat" <c...@munat.com
>     <mailto:c...@munat.com>> wrote:
>      >>>>>> Nope. Same error, even after blowing away m2 and rerunning
>     the basic
>      >>>>>> archetype to create a new app.
>      >>>>>> Chas.
>      >>>>>> Charles F. Munat wrote:
>      >>>>>>> No on blowing away m2. I did switch to the blank archetype
>     (which is
>      >>>>>>> what I actually wanted) and it worked fine. But I can try
>     again with the
>      >>>>>>> basic and blowing away m2.
>      >>>>>>> Chas.
>      >>>>>>> Derek Chen-Becker wrote:
>      >>>>>>>> It looks like this is still the older archive before
>     HttpServletRequest
>      >>>>>>>> → HTTPRequest. The code in master has the change applied,
>     so I'm not
>      >>>>>>>> sure why it's failing. The warnings are normal (I haven't
>     figured out
>      >>>>>>>> all of the tricks with the velocity templating), but
>     something isn't
>      >>>>>>>> being pulled correctly. Have you tried blowing away your .m2?
>      >>>>>>>> Derek
>      >>>>>>>> On Sun, Aug 23, 2009 at 9:45 PM, Charles F. Munat
>     <c...@munat.com <mailto:c...@munat.com>
>      >>>>>>>> <mailto:c...@munat.com <mailto:c...@munat.com>>> wrote:
>      >>>>>>>>     I found this in the lift book and used it:
>      >>>>>>>>     mvn archetype:generate \
>      >>>>>>>>    
>     -DarchetypeRepository=http://scala-tools.org/repo-snapshots\
>      >>>>>>>>     -DarchetypeGroupId=net.liftweb \
>      >>>>>>>>     -DarchetypeArtifactId=lift-archetype-jpa-basic \
>      >>>>>>>>     -DarchetypeVersion=1.1-SNAPSHOT \
>      >>>>>>>>     -DgroupId=com.foo.jpaweb \
>      >>>>>>>>     -DartifactId=JPADemo \
>      >>>>>>>>     -Dversion=1.0-SNAPSHOT
>      >>>>>>>>     During the creation of the basic jpa app, I got this:
>      >>>>>>>>     Downloading:
>      >>>>>>>>  
>      http://scala-tools.org/repo-snapshots/net/liftweb/lift-archetype-jpa-...
>      >>>>>>>>     44K
>      >>>>>>>>    
>     <http://scala-tools.org/repo-snapshots/net/liftweb/lift-archetype-jpa-...>
>      >>>>>>>>     downloaded  (lift-archetype-jpa-basic-1.1-SNAPSHOT.jar)
>      >>>>>>>>     [WARNING] *** CHECKSUM FAILED - Checksum failed on
>     download: local =
>      >>>>>>>>     '66b831a190e2e072816e5b2acc8064287d94b371'; remote =
>      >>>>>>>>     '023a3bb1cf2994e837b18394a2eb3975c8735552' - RETRYING
>      >>>>>>>>     Downloading:
>      >>>>>>>>  
>      http://scala-tools.org/repo-snapshots/net/liftweb/lift-archetype-jpa-...
>      >>>>>>>>     44K
>      >>>>>>>>    
>     <http://scala-tools.org/repo-snapshots/net/liftweb/lift-archetype-jpa-...>
>      >>>>>>>>     downloaded  (lift-archetype-jpa-basic-1.1-SNAPSHOT.jar)
>      >>>>>>>>     [WARNING] *** CHECKSUM FAILED - Checksum failed on
>     download: local =
>      >>>>>>>>     '66b831a190e2e072816e5b2acc8064287d94b371'; remote =
>      >>>>>>>>     '023a3bb1cf2994e837b18394a2eb3975c8735552' - IGNORING
>      >>>>>>>>     And a bunch of warnings:
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/pom.xml
>     [line 37,column 16] :
>      >>>>>>>>     ${scala.version} is not a valid reference.
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/pom.xml
>     [line 43,column 16] :
>      >>>>>>>>     ${scala.version} is not a valid reference.
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/pom.xml
>     [line 85,column 25] :
>      >>>>>>>>     ${scala.version} is not a valid reference.
>      >>>>>>>>     [WARNING] PT Don't override file
>     /private/var/www/lift/admin/pom.xml
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/web/pom.xml
>     [line 13,column
>      >>>>>>>>     9] : ${parent.artifactId} is not a valid reference.
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/web/pom.xml
>     [line 24,column
>      >>>>>>>>     16] : ${pom.groupId} is not a valid reference.
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/web/pom.xml
>     [line 26,column
>      >>>>>>>>     16] : ${pom.version} is not a valid reference.
>      >>>>>>>>     [WARNING]
>     org.apache.velocity.runtime.exception.ReferenceException:
>      >>>>>>>>     reference : template = archetype-resources/spa/pom.xml
>     [line 14,column
>      >>>>>>>>     9] : ${parent.artifactId} is not a valid reference.
>      >>>>>>>>     The build completed successfully anyway. Afterward, I
>     tried "mvn
>      >>>>>>>>     compile" in the top directory and got the following error:
>      >>>>>>>>     [WARNING]
>      >>>>>>>>    
>     
> /private/var/www/lift/admin/web/src/main/scala/bootstrap/liftweb/Boot.scala:70:
>      >>>>>>>>     error: type mismatch;
>      >>>>>>>>     [WARNING]  found   :
>      >>>>>>>>    
>     net.liftweb.util.Box[javax.servlet.http.HttpServletRequest]
>      >>>>>>>>     [WARNING]  required:
>      >>>>>>>>    
>     net.liftweb.util.Box[net.liftweb.http.provider.HTTPRequest]
>      >>>>>>>>     [WARNING]       case null =>
>      >>>>>>>>     Full(LiftRules.defaultLocaleCalculator(request))
>      >>>>>>>>     [WARNING]                                            
>                     ^
>      >>>>>>>>     [WARNING]
>      >>>>>>>>    
>     
> /private/var/www/lift/admin/web/src/main/scala/bootstrap/liftweb/Boot.scala:75:
>      >>>>>>>>     error: type mismatch;
>      >>>>>>>>     [WARNING]  found   :
>      >>>>>>>>    
>     (net.liftweb.util.Box[javax.servlet.http.HttpServletRequest]) =>
>      >>>>>>>>     java.util.Locale
>      >>>>>>>>     [WARNING]  required:
>      >>>>>>>>    
>     (net.liftweb.util.Box[net.liftweb.http.provider.HTTPRequest]) =>
>      >>>>>>>>     java.util.Locale
>      >>>>>>>>     [WARNING]     LiftRules.localeCalculator =
>     localeCalculator _
>      >>>>>>>>     [WARNING]                                  ^
>      >>>>>>>>     [WARNING] two errors found
>      >>>>>>>>     [INFO]
>      >>>>>>>>    
>     ------------------------------------------------------------------------
>      >>>>>>>>     [ERROR] BUILD FAILURE
>      >>>>>>>>     Hmmmm. Ideas?
>      >>>>>>>>     Chas.
>      >>>>>>>>     Charles F. Munat wrote:
>      >>>>>>>>      > Anyone know offhand what the mvn command is to
>     create a blank JPA
>      >>>>>>>>      > project (split, not single)? We should probably
>     collect all the
>      >>>>>>>>      > archetype commands and put them on the new wiki
>     (and keep them up to
>      >>>>>>>>      > date with the latest version number).
>      >>>>>>>>      > I'm happy to do it if I can figure out what the
>     right versions are...
>      >>>>>>>>      > Chas.
>      >
>      > >
>      >
> 
> 
> 
> 
> > 

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Lift" group.
To post to this group, send email to liftweb@googlegroups.com
To unsubscribe from this group, send email to 
liftweb+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/liftweb?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to