Hi Andy, Just getting round to looking at this. I have the USB sound card and some patch leads. I'm fine with hooking it up to the dispatcher server, and I can dedicate a LAVA Panda board to this, but I just need to know how the patch leads need to be connected. I'm assuming I connect "audio out" from the panda to "line in" on the USB card, but in terms of the return trip, as it were, there are three "outs": "Front out", "Rear out" and "CEN/Bass out".
If we're intending two way testing, then how should I configure this? Additionally, there is a "Mic In" and "SPDF in" and "SPDF out". Any guidance would be very welcome. Thanks Dave On 2 Dec 2012, at 02:30, Andy Green <[email protected]> wrote: > On 11/29/2012 10:52 PM, the mail apparently from Dave Pigott included: >> Hi all, >> >> I'm purchasing a dedicated server for the new dispatcher work, and also >> getting a USB sound card, as discussed at Connect. I'm looking for guidance >> as to functionality - a link to amazon would be quite helpful. :) >> >> Any suggestions welcome. > > > Hi Dave - > > This should be a good way to blow GBP11.45 > > http://www.amazon.co.uk/External-Sound-Card-Channel-Audio/dp/B003TO3KHY/ref=sr_1_5?ie=UTF8&qid=1354414953&sr=8-5 > > It's not what I have but with optical in and out as well as 6ch support it > should so the 2ch that we need as well. > > These (0.58) will do as the patch leads > > http://www.amazon.co.uk/3-5mm-Stereo-Jack-Plug-1-2M/dp/B00077DC3S/ref=pd_sim_ce_6 > > -Andy > > -- > Andy Green | TI Landing Team Leader > Linaro.org │ Open source software for ARM SoCs | Follow Linaro > http://facebook.com/pages/Linaro/155974581091106 - > http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog _______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
