Hi - The "front out" should double as stereo out in the default 2ch mode. You can check by stcking some headphones in and aplay -Dhw:1 mytest.wav or similar.
-Andy Dave Pigott <[email protected]> wrote: >Hi Andy, > >Just getting round to looking at this. I have the USB sound card and >some patch leads. I'm fine with hooking it up to the dispatcher server, >and I can dedicate a LAVA Panda board to this, but I just need to know >how the patch leads need to be connected. I'm assuming I connect "audio >out" from the panda to "line in" on the USB card, but in terms of the >return trip, as it were, there are three "outs": "Front out", "Rear >out" and "CEN/Bass out". > >If we're intending two way testing, then how should I configure this? > >Additionally, there is a "Mic In" and "SPDF in" and "SPDF out". > >Any guidance would be very welcome. > >Thanks > >Dave > >On 2 Dec 2012, at 02:30, Andy Green <[email protected]> wrote: > >> On 11/29/2012 10:52 PM, the mail apparently from Dave Pigott >included: >>> Hi all, >>> >>> I'm purchasing a dedicated server for the new dispatcher work, and >also getting a USB sound card, as discussed at Connect. I'm looking for >guidance as to functionality - a link to amazon would be quite helpful. >:) >>> >>> Any suggestions welcome. >> >> >> Hi Dave - >> >> This should be a good way to blow GBP11.45 >> >> >http://www.amazon.co.uk/External-Sound-Card-Channel-Audio/dp/B003TO3KHY/ref=sr_1_5?ie=UTF8&qid=1354414953&sr=8-5 >> >> It's not what I have but with optical in and out as well as 6ch >support it should so the 2ch that we need as well. >> >> These (0.58) will do as the patch leads >> >> >http://www.amazon.co.uk/3-5mm-Stereo-Jack-Plug-1-2M/dp/B00077DC3S/ref=pd_sim_ce_6 >> >> -Andy >> >> -- >> Andy Green | TI Landing Team Leader >> Linaro.org │ Open source software for ARM SoCs | Follow Linaro >> http://facebook.com/pages/Linaro/155974581091106 - >http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog
_______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
