Dave Pigott <[email protected]> writes: > On 7 Jan 2013, at 09:46, Andy Green <[email protected]> wrote: > >> On 07/01/13 17:36, the mail apparently from Dave Pigott included: >>> Hi Andy, >>> >>> One other question: >>> I assume you'll be wanting audio in and out available? On the panda, >>> which is which? I can't seem to find any documentation on that. :) >> >> It's the bottom connector that is the output from the Panda and the top >> connector that's the input to the Panda. > > Given a 50/50 chance, I happened to get it the right way first time. :)
So I've tried to run my test in the lab now, but it seems that it's not possible to capture audio from the device on the host. The other way around works fine -- I can capture audio on pandaes-02 that was played on the host -- but not device->host. I just get silence, or very near it: http://validation.linaro.org/lava-server/dashboard/streams/private/team/linaro/mwhudson-audio/bundles/fb40806759453f1650756e98044f2201173b2d51/9b8c3255-4c29-4c95-9915-a7e2435dca36/result/2/ (there is a touch of low frequency noise). I guess audio out in the image I'm using (http://snapshots.linaro.org/quantal/pre-built/panda/43/panda-quantal_developer_20130109-43.img.gz) could just be broken -- is this possible? -- or the cable could be loose, or something else entirely. I guess I'd appreciate it if Dave could check the cabling :-) Is there a known good image I could be using? Cheers, mwh > > Thanks > > Dave > _______________________________________________ > linaro-validation mailing list > [email protected] > http://lists.linaro.org/mailman/listinfo/linaro-validation _______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
