Hi Basil, The production manifest has been updated, if you upgrade your server(s) you will pick up the new fastmodel changes.
* Make sure you have the latest linaro-image-tools installed on all servers (2013.09) * https://github.com/EmbeddedAndroid/salt/tree/master/lava/devices/lava-worker-1/production- These are the device configurations I am using for reference. Let me know if you have any questions. Cheers, On 4 October 2013 15:25, Tyler Baker <[email protected]> wrote: > Hi Basil, > > > On 4 October 2013 02:09, Basil Eljuse <[email protected]> wrote: > >> Hi Tyler/Alan,**** >> >> ** ** >> >> Just to confirm. Dean has upgraded the deployment mode to git based repo >> rather than bzr repo. >> > > Excellent news! > > >> **** >> >> ** ** >> >> It seems to have gone well except for one issue where we found abd >> installation affected and had to reinstall adb again after the upgrade.** >> ** >> >> ** ** >> >> So once you are ready from your end we are good to pick up your changes >> for 64bit basemodel support. >> > > Here is the patchset, it has been tested. Awaiting final code review: > > https://staging.review.linaro.org/#/c/78/ > > If you want to check out the models running: > > rtsm_fvp_base-aemv8a<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a> > : > > http://community.validation.linaro.org/scheduler/job/1830 > > rtsm_fvp_base_cortex-a57x4-a53x4<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4> > > http://community.validation.linaro.org/scheduler/job/1858 > > rtsm_fvp_base_cortex-a57x1-a53x1<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1> > > http://community.validation.linaro.org/scheduler/job/1857 > > I'll let you know as soon as we have it available > > >> **** >> >> ** ** >> >> Thanks**** >> >> Basil Eljuse…**** >> >> ** >> > > Cheers, > > >> ** >> >> *From:* Basil Eljuse >> *Sent:* 30 September 2013 17:56 >> *To:* 'Tyler Baker' >> *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold >> *Subject:* RE: [Linaro-validation] LAVA upgrade for 64-bit models >> support...**** >> >> ** ** >> >> Hi Tyler,**** >> >> ** ** >> >> Dean confirmed that he will try on our staging area from the git source. >> We are still on bzr so far.**** >> >> ** ** >> >> Thanks**** >> >> Basil Eljuse…**** >> >> ** ** >> >> *From:* Tyler Baker [mailto:[email protected]<[email protected]>] >> >> *Sent:* 30 September 2013 16:31 >> *To:* Basil Eljuse >> *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold >> >> *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models >> support...**** >> >> ** ** >> >> Hi Basil,**** >> >> ** ** >> >> Is your local LAVA server still using bzr? I ask because we have recently >> moved all the LAVA code to git. If you have not made the switch you will >> want to fetch our deployment tool from git.**** >> >> ** ** >> >> git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git >> **** >> >> cd lava-deployment-tool**** >> >> ./lava-deployment-tool setup**** >> >> ./lava-deployment-tool upgrade <instance>**** >> >> ** ** >> >> Cheers,**** >> >> ** ** >> >> On 30 September 2013 08:14, Basil Eljuse <[email protected]> wrote:*** >> * >> >> Hi Alan,**** >> >> **** >> >> Cool. Yes I am aware of the 2 week activity for this LAVA integration. I >> wanted to align ourselves in timeline with your upcoming release. Thanks a >> lot for the clarifications.**** >> >> **** >> >> Do let us know when it is good for us to pick up.**** >> >> **** >> >> Thanks**** >> >> Basil Eljuse…**** >> >> **** >> >> *From:* Alan Bennett [mailto:[email protected]] >> *Sent:* 30 September 2013 16:08 >> *To:* Basil Eljuse >> *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker >> *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models >> support...**** >> >> **** >> >> Hello Basil;**** >> >> That is the correct card, You'll want to contact [email protected]/Kantaif >> you can't see them, From my end, as long as you are logged in, you >> should be able to see them. **** >> >> **** >> >> The models are not yet available in production LAVA, we didn't receive >> them until after they were released, so we are now working to incorporate >> them. Kanta has us down for a few weeks on her schedule, have you seen >> this? The optimist in me says things will go much quicker, but we have >> encountered a few differences already that we are still working on. Right >> now we have the new models 'working', but we are working on a few >> regressions before we'll be ready to release this. Shouldn't be long...* >> *** >> >> **** >> >> You can see the early progress here. **** >> >> http://community.validation.linaro.org/scheduler/job/1596**** >> >> http://community.validation.linaro.org/scheduler/job/1595**** >> >> http://community.validation.linaro.org/scheduler/job/1594**** >> >> **** >> >> Alan**** >> >> **** >> >> **** >> >> **** >> >> On 29 September 2013 08:33, Basil Eljuse <[email protected]> wrote:*** >> * >> >> Hi Dave,**** >> >> **** >> >> I am hoping that probably you might be working on this ticket >> https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get >> permission denied when accessing the card), if not please anyone in the >> wider validation email group please redirect me appropriately.**** >> >> **** >> >> With 13.09 we do have the new Base model variants released and with the >> above ticket we expect to have LAVA support for these models also.**** >> >> **** >> >> Since we do have a local LAVA instance, I would like to figure out how we >> can pick the upgrades and apply to our local instance. Could anyone please >> advice when we could expect this upgrade to LAVA for supporting 64-bit base >> models, coming our way?**** >> >> **** >> >> I want to get Dean a heads-up in terms of his plan to get our setup >> upgraded. **** >> >> **** >> >> **** >> >> Thanks**** >> >> Basil Eljuse…**** >> >> **** >> >> >> -- IMPORTANT NOTICE: The contents of this email and any attachments are >> confidential and may also be privileged. If you are not the intended >> recipient, please notify the sender immediately and do not disclose the >> contents to any other person, use it for any purpose, or store or copy the >> information in any medium. Thank you. >> >> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2557590 >> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2548782**** >> >> >> _______________________________________________ >> linaro-validation mailing list >> [email protected] >> http://lists.linaro.org/mailman/listinfo/linaro-validation**** >> >> >> >> **** >> >> **** >> >> -- **** >> >> Alan Bennett, Engineering Manager, Linaro LAVA Team >> Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM >> SoCs | Follow Linaro*: *Facebook <http://www.facebook.com/pages/Linaro> >> | Twitter <http://twitter.com/#%21/linaroorg> | >> Blog<http://www.linaro.org/linaro-blog/> >> irc: akbennett | [email protected] | >> [email protected]**** >> >> >> -- IMPORTANT NOTICE: The contents of this email and any attachments are >> confidential and may also be privileged. If you are not the intended >> recipient, please notify the sender immediately and do not disclose the >> contents to any other person, use it for any purpose, or store or copy the >> information in any medium. Thank you. >> >> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2557590 >> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2548782**** >> >> >> >> **** >> >> ** ** >> >> -- **** >> >> Tyler Baker >> Technical Architect, LAVA >> Linaro.org | Open source software for ARM SoCs >> Follow Linaro: http://www.facebook.com/pages/Linaro >> http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog**** >> >> -- IMPORTANT NOTICE: The contents of this email and any attachments are >> confidential and may also be privileged. If you are not the intended >> recipient, please notify the sender immediately and do not disclose the >> contents to any other person, use it for any purpose, or store or copy the >> information in any medium. Thank you. >> >> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2557590 >> ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, >> Registered in England & Wales, Company No: 2548782 >> > > > > -- > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog > -- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
_______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
