Hi Basil,
On 9 October 2013 04:01, Basil Eljuse <[email protected]> wrote: > Hi Tyler,**** > > ** ** > > Thanks for the inputs.**** > > ** ** > > Can you also please confirm what existing 32-bit model variants are > supported in LAVA? We want to pipe-clean our setup with 32-bit variants > before moving to 64-bit. > We have support for two 32 bit models: rtsm_ve-a15x1-a7x1 rtsm_ve-a15x4-a7x4 Cheers, > **** > > ** ** > > Thanks**** > > Basil Eljuse…**** > > ** ** > > *From:* Tyler Baker [mailto:[email protected]] > *Sent:* 07 October 2013 17:36 > > *To:* Basil Eljuse > *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold > *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models > support...**** > > ** ** > > Hi Basil,**** > > ** ** > > The production manifest has been updated, if you upgrade your server(s) > you will pick up the new fastmodel changes. **** > > ** ** > > * Make sure you have the latest linaro-image-tools installed on all > servers (2013.09)**** > > ** ** > > * > https://github.com/EmbeddedAndroid/salt/tree/master/lava/devices/lava-worker-1/production- > These are the device configurations I am using for reference. > **** > > ** ** > > Let me know if you have any questions.**** > > ** ** > > Cheers,**** > > ** ** > > On 4 October 2013 15:25, Tyler Baker <[email protected]> wrote:**** > > Hi Basil,**** > > ** ** > > On 4 October 2013 02:09, Basil Eljuse <[email protected]> wrote:**** > > Hi Tyler/Alan,**** > > **** > > Just to confirm. Dean has upgraded the deployment mode to git based repo > rather than bzr repo.**** > > ** ** > > Excellent news!**** > > **** > > **** > > It seems to have gone well except for one issue where we found abd > installation affected and had to reinstall adb again after the upgrade.*** > * > > **** > > So once you are ready from your end we are good to pick up your changes > for 64bit basemodel support.**** > > ** ** > > Here is the patchset, it has been tested. Awaiting final code review:**** > > ** ** > > https://staging.review.linaro.org/#/c/78/**** > > ** ** > > If you want to check out the models running:**** > > ** ** > > rtsm_fvp_base-aemv8a<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base-aemv8a> > :**** > > ** ** > > http://community.validation.linaro.org/scheduler/job/1830**** > > ** ** > > rtsm_fvp_base_cortex-a57x4-a53x4<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x4-a53x4> > **** > > ** ** > > http://community.validation.linaro.org/scheduler/job/1858**** > > ** ** > > rtsm_fvp_base_cortex-a57x1-a53x1<http://community.validation.linaro.org/scheduler/device_type/rtsm_fvp_base_cortex-a57x1-a53x1> > **** > > ** ** > > http://community.validation.linaro.org/scheduler/job/1857**** > > ** ** > > I'll let you know as soon as we have it available**** > > **** > > **** > > Thanks**** > > Basil Eljuse…**** > > **** > > ** ** > > Cheers,**** > > **** > > *From:* Basil Eljuse > *Sent:* 30 September 2013 17:56 > *To:* 'Tyler Baker' > *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold > *Subject:* RE: [Linaro-validation] LAVA upgrade for 64-bit models > support...**** > > **** > > Hi Tyler,**** > > **** > > Dean confirmed that he will try on our staging area from the git source. > We are still on bzr so far.**** > > **** > > Thanks**** > > Basil Eljuse…**** > > **** > > *From:* Tyler Baker [mailto:[email protected]<[email protected]>] > **** > > *Sent:* 30 September 2013 16:31 > *To:* Basil Eljuse**** > > *Cc:* Alan Bennett; Linaro Validation; Dave Pigott; Dean Arnold**** > > > *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models > support...**** > > **** > > Hi Basil,**** > > **** > > Is your local LAVA server still using bzr? I ask because we have recently > moved all the LAVA code to git. If you have not made the switch you will > want to fetch our deployment tool from git.**** > > **** > > git clone http://staging.git.linaro.org/git/lava/lava-deployment-tool.git* > *** > > cd lava-deployment-tool**** > > ./lava-deployment-tool setup**** > > ./lava-deployment-tool upgrade <instance>**** > > **** > > Cheers,**** > > **** > > On 30 September 2013 08:14, Basil Eljuse <[email protected]> wrote:**** > > Hi Alan,**** > > **** > > Cool. Yes I am aware of the 2 week activity for this LAVA integration. I > wanted to align ourselves in timeline with your upcoming release. Thanks a > lot for the clarifications.**** > > **** > > Do let us know when it is good for us to pick up.**** > > **** > > Thanks**** > > Basil Eljuse…**** > > **** > > *From:* Alan Bennett [mailto:[email protected]] > *Sent:* 30 September 2013 16:08 > *To:* Basil Eljuse > *Cc:* Linaro Validation; Dave Pigott; Dean Arnold; Tyler Baker > *Subject:* Re: [Linaro-validation] LAVA upgrade for 64-bit models > support...**** > > **** > > Hello Basil;**** > > That is the correct card, You'll want to contact [email protected]/Kantaif > you can't see them, From my end, as long as you are logged in, you > should be able to see them. **** > > **** > > The models are not yet available in production LAVA, we didn't receive > them until after they were released, so we are now working to incorporate > them. Kanta has us down for a few weeks on her schedule, have you seen > this? The optimist in me says things will go much quicker, but we have > encountered a few differences already that we are still working on. Right > now we have the new models 'working', but we are working on a few > regressions before we'll be ready to release this. Shouldn't be long...** > ** > > **** > > You can see the early progress here. **** > > http://community.validation.linaro.org/scheduler/job/1596**** > > http://community.validation.linaro.org/scheduler/job/1595**** > > http://community.validation.linaro.org/scheduler/job/1594**** > > **** > > Alan**** > > **** > > **** > > **** > > On 29 September 2013 08:33, Basil Eljuse <[email protected]> wrote:**** > > Hi Dave,**** > > **** > > I am hoping that probably you might be working on this ticket > https://cards.linaro.org/browse/CARD-832 (got from Kanta, although I get > permission denied when accessing the card), if not please anyone in the > wider validation email group please redirect me appropriately.**** > > **** > > With 13.09 we do have the new Base model variants released and with the > above ticket we expect to have LAVA support for these models also.**** > > **** > > Since we do have a local LAVA instance, I would like to figure out how we > can pick the upgrades and apply to our local instance. Could anyone please > advice when we could expect this upgrade to LAVA for supporting 64-bit base > models, coming our way?**** > > **** > > I want to get Dean a heads-up in terms of his plan to get our setup > upgraded. ** ** > > **** > > **** > > Thanks**** > > Basil Eljuse…**** > > **** > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782**** > > > _______________________________________________ > linaro-validation mailing list > [email protected] > http://lists.linaro.org/mailman/listinfo/linaro-validation**** > > > > **** > > **** > > -- **** > > Alan Bennett, Engineering Manager, Linaro LAVA Team > Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM > SoCs | Follow Linaro*: *Facebook <http://www.facebook.com/pages/Linaro> | > Twitter <http://twitter.com/#%21/linaroorg> | > Blog<http://www.linaro.org/linaro-blog/> > irc: akbennett | [email protected] | > [email protected]**** > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782**** > > > > **** > > **** > > -- **** > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog**** > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782**** > > > > **** > > ** ** > > -- **** > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog**** > > > > **** > > ** ** > > -- **** > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog**** > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > -- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
_______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
