Text from Flash and previous Flash problem solutions

[Kyle Smeby]

Has anyone had any luck getting text from Flash into a Director text field? I can get numbers, no problem, but changing the value to text gives me nothing and changing it to a variable containing text gives me the "Comma expected" error. There is a tech note on Macromedia's site that says I should be able to do this, but there code only seems to work for numbers.

Any help with this would be greatly appreciated.

For anyone following my previous question about Flash flicker and setting the default to Direct to Stage:

The flicker problem was eliminated by making the sure the flash sprites WERE NOT Direct to Stage--so those two solved each other. Thanks to Colin for pointing out that I probably didn't want to use DTS. I had thought I needed to use DTS to get a decent frame rate out of the Flash sprite, but everything plays fine.

thanks,

kyle

[To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for learning and helping with programming Lingo. Thanks!]