Still not working I use ubuntu and works and I copied to the pi after doing ./autogen.sh and ./configure and on pi I done make but gave the same error:
Makefile:661: warning: overriding commands for target `.NOTPARALLEL' Makefile:655: warning: ignoring old commands for target `.NOTPARALLEL' /usr/bin/antlr3 -make -Xmultithreaded -fo . ./belle_sip_message.g two-threaded DFA conversion warning(200): ./belle_sip_message.g:1147:8: Decision can match input such as "CRLF" using multiple alternatives: 1, 2 As a result, alternative(s) 2 were disabled for that input warning(200): ./belle_sip_message.g:1147:8: Decision can match input such as "SP" using multiple alternatives: 1, 2 java -version on pi: java version "1.7.0_25" OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1~deb7u1+rpi1) OpenJDK Zero VM (build 22.0-b10, mixed mode) 2014-04-09 15:43 GMT+01:00 Guillaume Beraudo <[email protected] >: > Hi, > > I guess you are doing all this on your PI. > As a consequence, you need a JVM running on the PI since you need to > have some C files generated from the .g files. > > However, you may do on a PC > git clone, ./autogen.sh, ./configure > > Then copy the result to you PI and do on the PI: > ./configure -> make -> sudo make install > > > > Anyway, if you have the openjdk on PI it works great: > java version "1.7.0_51" > OpenJDK Runtime Environment (IcedTea 2.4.6) (7u51-2.4.6-1) > OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) > > > > On Wed, Apr 09, 2014 at 03:27:59PM +0100, Diogo Leite wrote: > > you can explain a little more please. Because now I not understand what I > > need to do to correct this problem. > > > > The steps I do after clone git are: ./autogen.sh -> ./configure -> make > -> > > sudo make install > > > > Thank you for your help. > > > > > > 2014-04-09 15:11 GMT+01:00 Guillaume Beraudo < > [email protected] > > >: > > > > > Hi, > > > > > > > > > Java is only required to generate some files before the compilation of > > > belle-sip. You may generate these files on your main computer and copy > > > them to your PI. > > > > > > > > > Guillaume Beraudo > > > > > > > > > On Wed, Apr 09, 2014 at 03:02:54PM +0100, Diogo Leite wrote: > > > > I tried to install but I don't know if I installed the correct > package. I > > > > only found this package: > > > > - jvm-7-avian-jre > > > > > > > > I already tried to remove gcj too. > > > > > > > > I still have the same error when I do make. > > > > > > > > > > > > 2014-04-09 13:19 GMT+01:00 BIENKOWSKI Guillaume < > > > > [email protected]>: > > > > > > > > > Hello Diogo, > > > > > > > > > > We found that using the GCJ java virtual machine produces these > errors, > > > > > whereas using the Oracle version goes flawlessly... > > > > > I suggest trying to install the Oracle JVM and update your > > > alternatives, > > > > > and retry. > > > > > > > > > > Cheers, > > > > > > > > > > *Guillaume BIENKOWSKI* > > > > > > > > > > *http://www.belledonne-communications.com/ > > > > > <http://www.belledonne-communications.com/> * > > > > > > > > > > *sip:[email protected] <sip%[email protected]>* > > > > > > > > > > > > > > > On Wed, Apr 9, 2014 at 12:54 PM, Diogo Leite < > [email protected] > > > >wrote: > > > > > > > > > >> Hello, > > > > >> > > > > >> when I execute make on raspberry-pi to install belle-sip I get > this > > > error: > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> Makefile:574: warning: overriding commands for target > `.NOTPARALLEL' > > > > >> Makefile:568: warning: ignoring old commands for target > `.NOTPARALLEL' > > > > >> /usr/bin/antlr3 -make -Xmultithreaded -fo . > ./belle_sip_message.g > > > > >> two-threaded DFA conversion > > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match > input > > > such > > > > >> as "CRLF" using multiple alternatives: 1, 2 > > > > >> As a result, alternative(s) 2 were disabled for that input > > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match > input > > > such > > > > >> as "SP" using multiple alternatives: 1, 2 > > > > >> As a result, alternative(s) 2 were disabled for that input > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match > input > > > > >> such as "SP" using multiple alternatives: 1, 2, 3 > > > > >> As a result, alternative(s) 3,2 were disabled for that input > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match > input > > > > >> such as "SEMI" using multiple alternatives: 1, 2 > > > > >> As a result, alternative(s) 2 were disabled for that input > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match > input > > > > >> such as "CRLF" using multiple alternatives: 1, 2, 3 > > > > >> As a result, alternative(s) 3,2 were disabled for that input > > > > >> error(201): ./belle_sip_message.g:1419:42: The following > alternatives > > > can > > > > >> never be matched: 2 > > > > >> > > > > >> warning(205): ./belle_sip_message.g:454:3: ANTLR could not analyze > > > this > > > > >> decision in rule dig_resp; often this is because of recursive rule > > > > >> references visible from the left edge of alternatives. ANTLR will > > > > >> re-analyze the decision with a fixed lookahead of k=1. Consider > using > > > > >> "options {k=1;}" for that decision and possibly adding a syntactic > > > > >> predicate. > > > > >> error(10): internal error: > > > > >> org.antlr.tool.Grammar.createLookaheadDFA(Grammar.java:1279): > could > > > not > > > > >> even do k=1 for decision 32; reason: timed out (>1000ms) > > > > >> > > > > >> .................... > > > > >> > > > > >> error(10): internal error: ./belle_sip_message.g : > > > > >> java.lang.NullPointerException: > > > > >> > > > > >> > > > > org.antlr.analysis.DFAOptimizer.optimizeExitBranches(DFAOptimizer.java:185) > > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:164) > > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:143) > > > > >> > org.antlr.codegen.CodeGenerator.genRecognizer(CodeGenerator.java:314) > > > > >> org.antlr.Tool.generateRecognizer(Tool.java:641) > > > > >> org.antlr.Tool.process(Tool.java:454) > > > > >> org.antlr.Tool.main(Tool.java:91) > > > > >> make[3]: *** [belle_sip_messageParser.c] Error 1 > > > > >> make[3]: Leaving directory `/home/pi/belle-sip-1.3.0/src/grammars' > > > > >> make[2]: *** [all-recursive] Error 1 > > > > >> make[2]: Leaving directory `/home/pi/belle-sip-1.3.0/src' > > > > >> make[1]: *** [all-recursive] Error 1 > > > > >> make[1]: Leaving directory `/home/pi/belle-sip-1.3.0' > > > > >> make: *** [all] Error 2 > > > > >> > > > > >> > > > > >> Antlr version: > > > > >> antlr3 - version 3.2-7 > > > > >> > > > > >> > > > > >> > > > > >> How I can install belle-sip on raspberry-pi? > > > > >> > > > > >> Thank you > > > > >> > > > > >> > > > > >> _______________________________________________ > > > > >> Linphone-users mailing list > > > > >> [email protected] > > > > >> https://lists.nongnu.org/mailman/listinfo/linphone-users > > > > >> > > > > >> > > > > > > > > > > _______________________________________________ > > > > > Linphone-users mailing list > > > > > [email protected] > > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Linphone-users mailing list > > > > [email protected] > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > > > > > _______________________________________________ > > > Linphone-users mailing list > > > [email protected] > > > https://lists.nongnu.org/mailman/listinfo/linphone-users > > > > > > _______________________________________________ > > Linphone-users mailing list > > [email protected] > > https://lists.nongnu.org/mailman/listinfo/linphone-users > > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users >
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
