Actually I believe you have to issue a make under your Ubuntu to prepare the C files. No need to finish the compilation; once the g files have been processed you can stop the compilation, and copy the generated files on your Pi.
*Guillaume BIENKOWSKI* *http://www.belledonne-communications.com/ <http://www.belledonne-communications.com/> * *sip:[email protected] <sip%[email protected]>* On Wed, Apr 9, 2014 at 5:25 PM, Diogo Leite <[email protected]>wrote: > Still not working I use ubuntu and works and I copied to the pi after > doing ./autogen.sh and ./configure and on pi I done make but gave the same > error: > > Makefile:661: warning: overriding commands for target `.NOTPARALLEL' > Makefile:655: warning: ignoring old commands for target `.NOTPARALLEL' > /usr/bin/antlr3 -make -Xmultithreaded -fo . ./belle_sip_message.g > two-threaded DFA conversion > warning(200): ./belle_sip_message.g:1147:8: Decision can match input such > as "CRLF" using multiple alternatives: 1, 2 > As a result, alternative(s) 2 were disabled for that input > warning(200): ./belle_sip_message.g:1147:8: Decision can match input such > as "SP" using multiple alternatives: 1, 2 > > > java -version on pi: > java version "1.7.0_25" > OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1~deb7u1+rpi1) > OpenJDK Zero VM (build 22.0-b10, mixed mode) > > > 2014-04-09 15:43 GMT+01:00 Guillaume Beraudo < > [email protected]>: > > Hi, >> >> I guess you are doing all this on your PI. >> As a consequence, you need a JVM running on the PI since you need to >> have some C files generated from the .g files. >> >> However, you may do on a PC >> git clone, ./autogen.sh, ./configure >> >> Then copy the result to you PI and do on the PI: >> ./configure -> make -> sudo make install >> >> >> >> Anyway, if you have the openjdk on PI it works great: >> java version "1.7.0_51" >> OpenJDK Runtime Environment (IcedTea 2.4.6) (7u51-2.4.6-1) >> OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) >> >> >> >> On Wed, Apr 09, 2014 at 03:27:59PM +0100, Diogo Leite wrote: >> > you can explain a little more please. Because now I not understand what >> I >> > need to do to correct this problem. >> > >> > The steps I do after clone git are: ./autogen.sh -> ./configure -> make >> -> >> > sudo make install >> > >> > Thank you for your help. >> > >> > >> > 2014-04-09 15:11 GMT+01:00 Guillaume Beraudo < >> [email protected] >> > >: >> > >> > > Hi, >> > > >> > > >> > > Java is only required to generate some files before the compilation of >> > > belle-sip. You may generate these files on your main computer and >> copy >> > > them to your PI. >> > > >> > > >> > > Guillaume Beraudo >> > > >> > > >> > > On Wed, Apr 09, 2014 at 03:02:54PM +0100, Diogo Leite wrote: >> > > > I tried to install but I don't know if I installed the correct >> package. I >> > > > only found this package: >> > > > - jvm-7-avian-jre >> > > > >> > > > I already tried to remove gcj too. >> > > > >> > > > I still have the same error when I do make. >> > > > >> > > > >> > > > 2014-04-09 13:19 GMT+01:00 BIENKOWSKI Guillaume < >> > > > [email protected]>: >> > > > >> > > > > Hello Diogo, >> > > > > >> > > > > We found that using the GCJ java virtual machine produces these >> errors, >> > > > > whereas using the Oracle version goes flawlessly... >> > > > > I suggest trying to install the Oracle JVM and update your >> > > alternatives, >> > > > > and retry. >> > > > > >> > > > > Cheers, >> > > > > >> > > > > *Guillaume BIENKOWSKI* >> > > > > >> > > > > *http://www.belledonne-communications.com/ >> > > > > <http://www.belledonne-communications.com/> * >> > > > > >> > > > > *sip:[email protected] <sip%[email protected]>* >> > > > > >> > > > > >> > > > > On Wed, Apr 9, 2014 at 12:54 PM, Diogo Leite < >> [email protected] >> > > >wrote: >> > > > > >> > > > >> Hello, >> > > > >> >> > > > >> when I execute make on raspberry-pi to install belle-sip I get >> this >> > > error: >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> Makefile:574: warning: overriding commands for target >> `.NOTPARALLEL' >> > > > >> Makefile:568: warning: ignoring old commands for target >> `.NOTPARALLEL' >> > > > >> /usr/bin/antlr3 -make -Xmultithreaded -fo . >> ./belle_sip_message.g >> > > > >> two-threaded DFA conversion >> > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match >> input >> > > such >> > > > >> as "CRLF" using multiple alternatives: 1, 2 >> > > > >> As a result, alternative(s) 2 were disabled for that input >> > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match >> input >> > > such >> > > > >> as "SP" using multiple alternatives: 1, 2 >> > > > >> As a result, alternative(s) 2 were disabled for that input >> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >> input >> > > > >> such as "SP" using multiple alternatives: 1, 2, 3 >> > > > >> As a result, alternative(s) 3,2 were disabled for that input >> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >> input >> > > > >> such as "SEMI" using multiple alternatives: 1, 2 >> > > > >> As a result, alternative(s) 2 were disabled for that input >> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >> input >> > > > >> such as "CRLF" using multiple alternatives: 1, 2, 3 >> > > > >> As a result, alternative(s) 3,2 were disabled for that input >> > > > >> error(201): ./belle_sip_message.g:1419:42: The following >> alternatives >> > > can >> > > > >> never be matched: 2 >> > > > >> >> > > > >> warning(205): ./belle_sip_message.g:454:3: ANTLR could not >> analyze >> > > this >> > > > >> decision in rule dig_resp; often this is because of recursive >> rule >> > > > >> references visible from the left edge of alternatives. ANTLR >> will >> > > > >> re-analyze the decision with a fixed lookahead of k=1. Consider >> using >> > > > >> "options {k=1;}" for that decision and possibly adding a >> syntactic >> > > > >> predicate. >> > > > >> error(10): internal error: >> > > > >> org.antlr.tool.Grammar.createLookaheadDFA(Grammar.java:1279): >> could >> > > not >> > > > >> even do k=1 for decision 32; reason: timed out (>1000ms) >> > > > >> >> > > > >> .................... >> > > > >> >> > > > >> error(10): internal error: ./belle_sip_message.g : >> > > > >> java.lang.NullPointerException: >> > > > >> >> > > > >> >> > > >> org.antlr.analysis.DFAOptimizer.optimizeExitBranches(DFAOptimizer.java:185) >> > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:164) >> > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:143) >> > > > >> >> org.antlr.codegen.CodeGenerator.genRecognizer(CodeGenerator.java:314) >> > > > >> org.antlr.Tool.generateRecognizer(Tool.java:641) >> > > > >> org.antlr.Tool.process(Tool.java:454) >> > > > >> org.antlr.Tool.main(Tool.java:91) >> > > > >> make[3]: *** [belle_sip_messageParser.c] Error 1 >> > > > >> make[3]: Leaving directory >> `/home/pi/belle-sip-1.3.0/src/grammars' >> > > > >> make[2]: *** [all-recursive] Error 1 >> > > > >> make[2]: Leaving directory `/home/pi/belle-sip-1.3.0/src' >> > > > >> make[1]: *** [all-recursive] Error 1 >> > > > >> make[1]: Leaving directory `/home/pi/belle-sip-1.3.0' >> > > > >> make: *** [all] Error 2 >> > > > >> >> > > > >> >> > > > >> Antlr version: >> > > > >> antlr3 - version 3.2-7 >> > > > >> >> > > > >> >> > > > >> >> > > > >> How I can install belle-sip on raspberry-pi? >> > > > >> >> > > > >> Thank you >> > > > >> >> > > > >> >> > > > >> _______________________________________________ >> > > > >> Linphone-users mailing list >> > > > >> [email protected] >> > > > >> https://lists.nongnu.org/mailman/listinfo/linphone-users >> > > > >> >> > > > >> >> > > > > >> > > > > _______________________________________________ >> > > > > Linphone-users mailing list >> > > > > [email protected] >> > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users >> > > > > >> > > > > >> > > >> > > > _______________________________________________ >> > > > Linphone-users mailing list >> > > > [email protected] >> > > > https://lists.nongnu.org/mailman/listinfo/linphone-users >> > > >> > > >> > > _______________________________________________ >> > > Linphone-users mailing list >> > > [email protected] >> > > https://lists.nongnu.org/mailman/listinfo/linphone-users >> > > >> >> > _______________________________________________ >> > Linphone-users mailing list >> > [email protected] >> > https://lists.nongnu.org/mailman/listinfo/linphone-users >> >> >> _______________________________________________ >> Linphone-users mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/linphone-users >> > > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > >
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
