Hello, I solved the problem with bellesip doing in ubuntu ./autogen.sh ./configure and make and I copied the folder to the pi and then I done on pi ./autogen.sh ./configure and make and it worked.
Now when I try to do make to linphone I get this error: Making all in src make[4]: Entering directory `/home/pi/linphone/mediastreamer2/src' if test -d ../.git ; then \ /bin/echo -n "#define GIT_VERSION " > gitversion.h.tmp &&\ /bin/echo \"`cd .. && git describe --always`\" >> gitversion.h.tmp &&\ if test "`cat gitversion.h.tmp`" != "`cat ./gitversion.h`" ; then \ cp -f gitversion.h.tmp ./gitversion.h ; \ fi \ && rm -f gitversion.h.tmp ;\ fi if ! test -f ./gitversion.h ; then \ /bin/echo -n "#define GIT_VERSION \"unknown\" " > ./gitversion.h ;\ fi make all-am make[5]: Entering directory `/home/pi/linphone/mediastreamer2/src' if test -d ../.git ; then \ /bin/echo -n "#define GIT_VERSION " > gitversion.h.tmp &&\ /bin/echo \"`cd .. && git describe --always`\" >> gitversion.h.tmp &&\ if test "`cat gitversion.h.tmp`" != "`cat ./gitversion.h`" ; then \ cp -f gitversion.h.tmp ./gitversion.h ; \ fi \ && rm -f gitversion.h.tmp ;\ fi if ! test -f ./gitversion.h ; then \ /bin/echo -n "#define GIT_VERSION \"unknown\" " > ./gitversion.h ;\ fi CC voip/msvideo_neon.lo voip/msvideo_neon.c:382:13: error: 'reverse_and_down_scale_32bytes_neon' defined but not used [-Werror=unused-function] voip/msvideo_neon.c:401:13: error: 'reverse_16bytes_neon' defined but not used [-Werror=unused-function] voip/msvideo_neon.c:420:13: error: 'deinterlace_and_reverse_2x8bytes_neon' defined but not used [-Werror=unused-function] voip/msvideo_neon.c:439:13: error: 'deinterlace_down_scale_and_reverse_2x16bytes_neon' defined but not used [-Werror=unused-function] cc1: all warnings being treated as errors make[5]: *** [voip/msvideo_neon.lo] Error 1 make[5]: Leaving directory `/home/pi/linphone/mediastreamer2/src' make[4]: *** [all] Error 2 make[4]: Leaving directory `/home/pi/linphone/mediastreamer2/src' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/pi/linphone/mediastreamer2' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/pi/linphone/mediastreamer2' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/pi/linphone' make: *** [all] Error 2 Any solution for this? Thank you 2014-04-09 16:30 GMT+01:00 BIENKOWSKI Guillaume < [email protected]>: > Actually I believe you have to issue a make under your Ubuntu to prepare > the C files. > No need to finish the compilation; once the g files have been processed > you can stop the compilation, and copy the generated files on your Pi. > > *Guillaume BIENKOWSKI* > > *http://www.belledonne-communications.com/ > <http://www.belledonne-communications.com/> * > > *sip:[email protected] <sip%[email protected]>* > > > On Wed, Apr 9, 2014 at 5:25 PM, Diogo Leite <[email protected]>wrote: > >> Still not working I use ubuntu and works and I copied to the pi after >> doing ./autogen.sh and ./configure and on pi I done make but gave the same >> error: >> >> Makefile:661: warning: overriding commands for target `.NOTPARALLEL' >> Makefile:655: warning: ignoring old commands for target `.NOTPARALLEL' >> /usr/bin/antlr3 -make -Xmultithreaded -fo . ./belle_sip_message.g >> two-threaded DFA conversion >> warning(200): ./belle_sip_message.g:1147:8: Decision can match input such >> as "CRLF" using multiple alternatives: 1, 2 >> As a result, alternative(s) 2 were disabled for that input >> warning(200): ./belle_sip_message.g:1147:8: Decision can match input such >> as "SP" using multiple alternatives: 1, 2 >> >> >> java -version on pi: >> java version "1.7.0_25" >> OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1~deb7u1+rpi1) >> OpenJDK Zero VM (build 22.0-b10, mixed mode) >> >> >> 2014-04-09 15:43 GMT+01:00 Guillaume Beraudo < >> [email protected]>: >> >> Hi, >>> >>> I guess you are doing all this on your PI. >>> As a consequence, you need a JVM running on the PI since you need to >>> have some C files generated from the .g files. >>> >>> However, you may do on a PC >>> git clone, ./autogen.sh, ./configure >>> >>> Then copy the result to you PI and do on the PI: >>> ./configure -> make -> sudo make install >>> >>> >>> >>> Anyway, if you have the openjdk on PI it works great: >>> java version "1.7.0_51" >>> OpenJDK Runtime Environment (IcedTea 2.4.6) (7u51-2.4.6-1) >>> OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) >>> >>> >>> >>> On Wed, Apr 09, 2014 at 03:27:59PM +0100, Diogo Leite wrote: >>> > you can explain a little more please. Because now I not understand >>> what I >>> > need to do to correct this problem. >>> > >>> > The steps I do after clone git are: ./autogen.sh -> ./configure -> >>> make -> >>> > sudo make install >>> > >>> > Thank you for your help. >>> > >>> > >>> > 2014-04-09 15:11 GMT+01:00 Guillaume Beraudo < >>> [email protected] >>> > >: >>> > >>> > > Hi, >>> > > >>> > > >>> > > Java is only required to generate some files before the compilation >>> of >>> > > belle-sip. You may generate these files on your main computer and >>> copy >>> > > them to your PI. >>> > > >>> > > >>> > > Guillaume Beraudo >>> > > >>> > > >>> > > On Wed, Apr 09, 2014 at 03:02:54PM +0100, Diogo Leite wrote: >>> > > > I tried to install but I don't know if I installed the correct >>> package. I >>> > > > only found this package: >>> > > > - jvm-7-avian-jre >>> > > > >>> > > > I already tried to remove gcj too. >>> > > > >>> > > > I still have the same error when I do make. >>> > > > >>> > > > >>> > > > 2014-04-09 13:19 GMT+01:00 BIENKOWSKI Guillaume < >>> > > > [email protected]>: >>> > > > >>> > > > > Hello Diogo, >>> > > > > >>> > > > > We found that using the GCJ java virtual machine produces these >>> errors, >>> > > > > whereas using the Oracle version goes flawlessly... >>> > > > > I suggest trying to install the Oracle JVM and update your >>> > > alternatives, >>> > > > > and retry. >>> > > > > >>> > > > > Cheers, >>> > > > > >>> > > > > *Guillaume BIENKOWSKI* >>> > > > > >>> > > > > *http://www.belledonne-communications.com/ >>> > > > > <http://www.belledonne-communications.com/> * >>> > > > > >>> > > > > *sip:[email protected] <sip%[email protected]>* >>> > > > > >>> > > > > >>> > > > > On Wed, Apr 9, 2014 at 12:54 PM, Diogo Leite < >>> [email protected] >>> > > >wrote: >>> > > > > >>> > > > >> Hello, >>> > > > >> >>> > > > >> when I execute make on raspberry-pi to install belle-sip I get >>> this >>> > > error: >>> > > > >> >>> > > > >> >>> > > > >> >>> > > > >> >>> > > > >> Makefile:574: warning: overriding commands for target >>> `.NOTPARALLEL' >>> > > > >> Makefile:568: warning: ignoring old commands for target >>> `.NOTPARALLEL' >>> > > > >> /usr/bin/antlr3 -make -Xmultithreaded -fo . >>> ./belle_sip_message.g >>> > > > >> two-threaded DFA conversion >>> > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match >>> input >>> > > such >>> > > > >> as "CRLF" using multiple alternatives: 1, 2 >>> > > > >> As a result, alternative(s) 2 were disabled for that input >>> > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match >>> input >>> > > such >>> > > > >> as "SP" using multiple alternatives: 1, 2 >>> > > > >> As a result, alternative(s) 2 were disabled for that input >>> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >>> input >>> > > > >> such as "SP" using multiple alternatives: 1, 2, 3 >>> > > > >> As a result, alternative(s) 3,2 were disabled for that input >>> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >>> input >>> > > > >> such as "SEMI" using multiple alternatives: 1, 2 >>> > > > >> As a result, alternative(s) 2 were disabled for that input >>> > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match >>> input >>> > > > >> such as "CRLF" using multiple alternatives: 1, 2, 3 >>> > > > >> As a result, alternative(s) 3,2 were disabled for that input >>> > > > >> error(201): ./belle_sip_message.g:1419:42: The following >>> alternatives >>> > > can >>> > > > >> never be matched: 2 >>> > > > >> >>> > > > >> warning(205): ./belle_sip_message.g:454:3: ANTLR could not >>> analyze >>> > > this >>> > > > >> decision in rule dig_resp; often this is because of recursive >>> rule >>> > > > >> references visible from the left edge of alternatives. ANTLR >>> will >>> > > > >> re-analyze the decision with a fixed lookahead of k=1. >>> Consider using >>> > > > >> "options {k=1;}" for that decision and possibly adding a >>> syntactic >>> > > > >> predicate. >>> > > > >> error(10): internal error: >>> > > > >> org.antlr.tool.Grammar.createLookaheadDFA(Grammar.java:1279): >>> could >>> > > not >>> > > > >> even do k=1 for decision 32; reason: timed out (>1000ms) >>> > > > >> >>> > > > >> .................... >>> > > > >> >>> > > > >> error(10): internal error: ./belle_sip_message.g : >>> > > > >> java.lang.NullPointerException: >>> > > > >> >>> > > > >> >>> > > >>> org.antlr.analysis.DFAOptimizer.optimizeExitBranches(DFAOptimizer.java:185) >>> > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:164) >>> > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:143) >>> > > > >> >>> org.antlr.codegen.CodeGenerator.genRecognizer(CodeGenerator.java:314) >>> > > > >> org.antlr.Tool.generateRecognizer(Tool.java:641) >>> > > > >> org.antlr.Tool.process(Tool.java:454) >>> > > > >> org.antlr.Tool.main(Tool.java:91) >>> > > > >> make[3]: *** [belle_sip_messageParser.c] Error 1 >>> > > > >> make[3]: Leaving directory >>> `/home/pi/belle-sip-1.3.0/src/grammars' >>> > > > >> make[2]: *** [all-recursive] Error 1 >>> > > > >> make[2]: Leaving directory `/home/pi/belle-sip-1.3.0/src' >>> > > > >> make[1]: *** [all-recursive] Error 1 >>> > > > >> make[1]: Leaving directory `/home/pi/belle-sip-1.3.0' >>> > > > >> make: *** [all] Error 2 >>> > > > >> >>> > > > >> >>> > > > >> Antlr version: >>> > > > >> antlr3 - version 3.2-7 >>> > > > >> >>> > > > >> >>> > > > >> >>> > > > >> How I can install belle-sip on raspberry-pi? >>> > > > >> >>> > > > >> Thank you >>> > > > >> >>> > > > >> >>> > > > >> _______________________________________________ >>> > > > >> Linphone-users mailing list >>> > > > >> [email protected] >>> > > > >> https://lists.nongnu.org/mailman/listinfo/linphone-users >>> > > > >> >>> > > > >> >>> > > > > >>> > > > > _______________________________________________ >>> > > > > Linphone-users mailing list >>> > > > > [email protected] >>> > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users >>> > > > > >>> > > > > >>> > > >>> > > > _______________________________________________ >>> > > > Linphone-users mailing list >>> > > > [email protected] >>> > > > https://lists.nongnu.org/mailman/listinfo/linphone-users >>> > > >>> > > >>> > > _______________________________________________ >>> > > Linphone-users mailing list >>> > > [email protected] >>> > > https://lists.nongnu.org/mailman/listinfo/linphone-users >>> > > >>> >>> > _______________________________________________ >>> > Linphone-users mailing list >>> > [email protected] >>> > https://lists.nongnu.org/mailman/listinfo/linphone-users >>> >>> >>> _______________________________________________ >>> Linphone-users mailing list >>> [email protected] >>> https://lists.nongnu.org/mailman/listinfo/linphone-users >>> >> >> >> _______________________________________________ >> Linphone-users mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/linphone-users >> >> > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > >
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
