Thanks for the responses, but it didn't fix the problem.
I have just booted from the reader, and I am being prompted
for network setup. Here is what I get.
.
.
.
3
qdio 27728 0
[qeth]
All OSA Express/Gigabit
detected:
chan cu cu dev dev in
chandev
irq devno type type model type model pim chpids
use reg.
===============================================================================
0x000e 0x2e70 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000
yes yes
0x000f 0x2e71 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000
yes yes
0x0010 0x2e75 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0200000000000000
yes yes
For Gigabit Ethernet Cards, autodetection will use the first 3
addesses
found, even if they are used by an other LPAR. This seems to
work
with Gbit Cards and z/VM, but it is not required that it works in every
case.
For autodetection enter auto or enter the device addresses
for
the qeth module, e.g. '0xf800,0xf801,0xf802' (auto):
0x2e70,0x2e71,0x2e75,OSAQDI
O2
qeth 164208 0
(unused)
qdio 27728 0
[qeth]
eth0: error fetching interface information: Device not
found
eth0 not available, check device
addresses/cards.
Do you want to retry the qeth-setup (Yes/No)
?
begin:vcard
n:Buck;Bruce
x-mozilla-html:FALSE
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
x-mozilla-cpt:;0
fn:Bruce
end:vcard
