It is working. If I may ask, does linux390 understand EMIF, reason being I have only one escon channel from my S390 box to the 2216 which is shared by about 6 lpars including my linux lpar. I can get my TR0 , TR1 up using ifconfig but as soon as I try to ping my 2216 (gw 172.20.15.85), my linux system doesn't see it. Our network guys thinks maybe is because linux doesn't understand EMIF. When I do ifconfig it shows both TR0,TR1 and even on the 2216 site it shows that the devices are up
Thanx a lot for the last reply moloko > -----Original Message----- > From: Rob van der Heij [SMTP:[EMAIL PROTECTED]] > Sent: 18 February 2002 14:19 > To: [EMAIL PROTECTED] > Subject: Re: Insmod command (RH7.2) > > At 10:43 18-02-02 +0200, you wrote: > >I've been there, done that. how do I add the second lcs , do I call > it > >lcs1 or lcs0 for instance: > > echo lcs0,0x510,0x511,0,9 >> /proc/chandev (first tr0) > > echo lcs1,0x510,0x511,0,9 >> /proc/chandev (second tr1) > > Yes, lcs1 will produce your eth1 network device. You'd > need other address than 510-511 ofcourse...
