Steve,
out of curiosity --- what parameters did you define for the qeth driver -
did you define a portname?
IIRC, there was a OSA microcode change. With the new code the cards
required a portname to be defined.
If the card is shared then all sharing systems need to specify the same
portname.
Otherwise its just required that its non-empty.
Kind regards,
Christoph
Steve Gear Schneider Technical Services <[EMAIL PROTECTED]>
@VM.MARIST.EDU> on 13.03.2002 11:26:39
Please respond to Linux on 390 Port <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: trying to us OSA/E Gig with
hello gerald,
thanks for your reply.
yes, the OSA will be shared, but the linux lpar is the only one using it
at this time. on this CEC we do not have a portname defined in vtam at this
time.
still looking
regards,
steve
"Benton,
Gerald" To: [EMAIL PROTECTED]
<Gerald_Benton@ cc:
CSX.com> Fax to:
Sent by: Linux Subject: Re: FTP and Telnet
not working in
on 390 Port linux 390 lpars
<[EMAIL PROTECTED]
ARIST.EDU>
03/13/2002
10:13 AM
Please respond
to Linux on 390
Port
Steve,
Is this OSA/SF shared with other MVS LPARS? If it is you have
to use the same portname you used in your TRLE definitions.
Good luck....
-----Original Message-----
From: Steve Gear Schneider Technical Services
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 13, 2002 11:01 AM
To: [EMAIL PROTECTED]
Subject: Re: FTP and Telnet not working in linux 390 lpars
hello,
we are trying to install linux s/390 with OSAE gig card and SUSE server
7. the chpid is online and enabled. when we IPL the initial system we get
the msg,
qeth received an IDX terminate on irq 0x485/0x486 with cause code 0x22
- - try another portname
there were problems in hard setting up the card.
anyone see this before.
thanks,
steve gear
