I tried with the slash.... the same error.... invalid parameter
- Tim -
Sergey Korzhevsky <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 26.04.2002
12:11:52
Bitte antworten an Linux on 390 Port <[EMAIL PROTECTED]>
Gesendet von: Linux on 390 Port <[EMAIL PROTECTED]>
An: [EMAIL PROTECTED]
Kopie:
Thema: Re: Antwort: AW: network problems during installation
Tim, Matthias said "in the installation system..."
If this command suitable after install, then try to use
insmod qeth
qeth_options=noauto,0x35a0,0x35a1,0x35a2\;add_parms,0x10,portname:OSAE
(after 0x35a2 add slash)
WBR, Sergey
"Tim-Chr. Hanschen"
<Tim-Christian.Hansch To:
[EMAIL PROTECTED]
[EMAIL PROTECTED]> cc:
Sent by: Linux on 390 Subject: Antwort: AW:
network problems during
Port installation
<[EMAIL PROTECTED]
EDU>
26.04.02 10:34
Please respond to
Linux on 390 Port
Matthias,
well, I tried the following:
SuSE:/ # insmod qeth
qeth_options=noauto,0x35a0,0x35a1,0x35a2;add_parms,0x10,portname:OSAE
Using /lib/modules/2.4.5-SuSE/net/qeth.o
/lib/modules/2.4.5-SuSE/net/qeth.o: invalid parameter parm_qeth
bash: add_parms,0x10,portname:OSAE: command not found
The portname is like the portname in zOS.
- Tim -
Matthias Wittpoth <[EMAIL PROTECTED]>@VM.MARIST.EDU> on
26.04.2002 09:05:07
Bitte antworten an Linux on 390 Port <[EMAIL PROTECTED]>
Gesendet von: Linux on 390 Port <[EMAIL PROTECTED]>
An: [EMAIL PROTECTED]
Kopie:
Thema: AW: network problems during installation
Tim,
maybe your problems with the installation routine could be fixed with this
workaround:
in the installationsystem enter the QETH parameters
0x35a0,0x35a1,0x35a2;add_parms,0x10,portname:OSAE
next question "Do you have OSE Express microcode level 0146 or higher?"
please answer with "n"
There is a fix for the installationsystem available at SuSE.
Is the portname ok? Matching with portname in os/390 ?
Matthias
> -----Urspr�ngliche Nachricht-----
> Von: Tim-Chr. Hanschen [SMTP:[EMAIL PROTECTED]]
> Gesendet am: Freitag, 26. April 2002 07:33
> An: [EMAIL PROTECTED]
> Betreff: network problems during installation
>
> Hi folks,
>
> I have a problem when installing SLES7. The installation routine cannot
> connect to our network, when selecting Gigabit Ethernet at the beginning
> of
> the installation, so I tried to install without network.
>
> I am afraid that I have to setup the network manually. First of all I
> tried
> to load the qdio:
>
> SuSE:/ # insmod qdio
> Using /lib/modules/2.4.5-SuSE/misc/qdio.o
> qdio: loading QDIO base support ($Revision: 1.40 $/$Revision: 1.22 $)
> debug: reserved 1 areas of 4 pages for debugging qdio_setup
> debug: qdio_setup: new level 2
> debug: reserved 2 areas of 4 pages for debugging qdio_labs
> debug: qdio_labs: new level 2
> debug: reserved 1 areas of 2 pages foer debugging qdio_sense
> debug: qdio_sense: new level 2
> debug: reserved 2 areas of 4 pages for debugging qdio_trace
> debug: qdio_trace: new level 2
>
> It seems that the driver has been loaded. After that I tried to load the
> qeth modul:
>
> SuSE:/# insmod qeth
> qeth_options=noautop,0x35a0,0x35a1,0x35a2,portname:OSAE
> Using /lib/modules/2.4.5-SuSE/net/qeth.o
> /lib/modules/2.4.5-SuSE/net/qeth.o: invalid parameter parm_qeth
>
> What is the problem? I installed the first SuSE GA months ago and as far
> as
> I remember it worked that way.
>
> TIA,
> - Tim -
