Tom,
The claw driver expects to see the c7000 as a 3088.
If you cat /proc/subchannels you should see something like:
Device sch. Dev Type/Model CU in use PIM PAM POM LPUM CHPIDs
--------------------------------------------------------------------------
33A4 0010 3088/61 yes 80 80 FF 80 9FFFFFFF FFFFFFFF
33A5 0011 3088/61 yes 80 80 FF 80 9FFFFFFF FFFFFFFF
The driver expects a CU type of 0x3088 and a CU model of 0x61
At UTS Global our c7000's are genned as:
C#9F CHPID PATH=9F,TYPE=CNC,PART=(VM1,REC)
*
CU9F01 CNTLUNIT PATH=9F,CUNUMBR=9F01,UNITADD=((00,256)), +
UNIT=CISCO
IODEVICE CUNUMBR=9F01,ADDRESS=(3300,256),UNIT=CISCO
Regards
Paul Winder
