Note that the URL Jere gave requires a userid and password to access. Mark (the sometimes aggravated archivist) Post
-----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED]]On Behalf Of Jere Julian Sent: Monday, December 23, 2002 11:17 AM To: [EMAIL PROTECTED] Subject: Re: Claw Driver problems On Fri, Dec 20, 2002 at 02:52:41PM -0500, Alan Altmark wrote: > On Friday, 12/20/2002 at 02:20 EST, Mark Post <[EMAIL PROTECTED]> wrote: > > Paul, > > > > Glad you could jump in here, since you can speak with a whole lot more > > authority on this than most. I did hear back from my co-worker, and he > > provided a somewhat different set of definitions that also seem to work: > > > > IODEVICE ADDRESS=(1000,128),CUNUMBR=(B000),STADET=Y,UNIT=SCTC > > CNTLUNIT CUNUMBR=B000,PATH=(B0),UNITADD=((00,128)),UNIT=SCTC > > Mark, UNIT=SCTC is needed for ESCON-attached routers. For parallel > attachment, use UNIT=3088 on CNTLUNIT and UNIT=CTC on IODEVICE. > > Alan Altmark > Sr. Software Engineer > IBM z/VM Development ---end quoted text--- will generally work as 3172 or SCTC but the oficial answer is SCTC: http://www.cisco.com/en/US/customer/tech/tk331/tk332/technologies_q_and_a_it em09186a0080094424.shtml -Jere -- --------------------------------------------------------------------- | Jere Julian, RHCE, CCNA Cisco Systems, Inc. ITD - IBM Sustaining | | mailto:[EMAIL PROTECTED] 7025 Kit Creek Rd, RTP, NC 27709 | ---------------------------------------------------------------------
