/proc/subchannels shows;
e40 0378 3088/01 80 80 ff fcffffff
e41 0379 3088/01 80 80 ff fcffffff
/proc/chandev in "channels detected" shows;
chan cu cu dev dev in chandev
irq devno type type model type model pim chipids use reg
0x0378 0x0e40 0x04 0x3088 0x01 0x0000 0x00 0x80 0xfcff..ff no no
0x0379 0x0e41 0x04 0x3088 0x01 0x0000 0x00 0x80 0xfcff..ff no no
/proc/chandev has a persist 0x00. Do I add a second persist card or add 0x04 to the
current one?
Michael A. Geiger
Sr. Operating Systems Programmer
CommerceQuest, Inc.
5481 W. Waters Ave.
Tampa, FL 33634
Tel. 813.639.6516
-----Original Message-----
From: Cornelia Huck [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 10, 2004 2:59 PM
To: [EMAIL PROTECTED]
Subject: Re: Changing Ethernet adaptors
> This is running in an LPAR which I also use for a second z/OS
> 1.4 image. The adaptor does work without issue with z/OS
> so I an confident that it is properly defined and assigned to
> the LPAR... at least for z/OS.
Hm... you should check in /proc/subchannels whether your devices
are detected by Linux at all. Also, you should check in
/proc/chandev whether your configuration appears in the 'forced
devices' section and your devices in the 'channels detected' section.
(You might want to do an 'echo persist,0x04 > /proc/chandev' before
loading lcs to keep it loaded even if it fails to initialize any devices).
Best regards / Mit freundlichen Gruessen
Cornelia Huck
Linux for zSeries Developer
Tel.: +49-7031-16-4837, Mail: [EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
