Yes, it works with TCP/IP. Asking the obvious is always a good idea. I have been bitten many times by overlooking the obvious.
Michael A. Geiger Sr. Operating Systems Programmer CommerceQuest, Inc. 5481 W. Waters Ave. Tampa, FL 33634 Tel. 813.639.6516 -----Original Message----- From: Vic Cross [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 10, 2004 8:07 PM To: [EMAIL PROTECTED] Subject: Re: Changing Ethernet adaptors Mike, On Wed, 10 Mar 2004, Geiger, Mike wrote: > Yes, LCS. Also SLES8. modprobe lcs and dmesg give me the same "no lcs > capable devices found" messages. This is running in an LPAR which I > also use for a second z/OS 1.4 image. The adaptor does work without > issue with z/OS so I an confident that it is properly defined and > assigned to the LPAR... at least for z/OS. When you say it works okay in z/OS, do you mean that it works as a TCP/IP interface and not VTAM? Recall that the device manager in the EMIO config is different for SNA devices than TCP/IP, so make sure that you're using the right device manager. Sorry if this is too obvious, it's just that the default ADCD definition for E40 is as an SNA device; I just want to make sure you were on top of that. Cheers, Vic Cross ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
