i'm getting closer to getting slack390 install tape onto the network via my 2216.
i'm getting: "chandev_setup unknown verb detected eth0,0x5012,0x5013 interpretted as eth0,0x5012,0x5013" both the flagged statement and what it interprets it as are identical. i'm also getting gobs of "device not found" errors for my 2216 devices. /proc/chandev has the devices listed /proc/subchannels have the devices listed as 3088/1f. shouldn't these be 3172 (which is how we have the devices defined in our iocds)? if so, is there a way to force them to the proper device type? my parameter file is: DASD=C103-C104 root=/dev/ram0 ro HOST=upgrlpar.maritimelife.ca:eth0:10.13.15.1:1500 NETWORK=10.13.15.1:255.255.255.0:10.13.15.255:10.13.15.2 DNS=10.10.1.101 CHANDEV=eth0,0x5012,0x5013 can anyone see what's wrong with this? Robin Murray Tel: (902) 453-7300 x4177 Cell: (902) 430-0637 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
