thanks for the quick response... but I have questions
__________________________________________
Ranga Nathan / CSG
Systems Programmer - Specialist; Technical Services;
BAX Global Inc. Irvine-California
Tel: 714-442-7591   Fax: 714-442-2840





John Schnitzler Jr <[EMAIL PROTECTED]>

12/01/2004 12:16 PM

        To:     Ranga Nathan <[EMAIL PROTECTED]>
        cc:
        Subject:        Re: Re-IPL from backups



Ranga,

I saw your append on the Marist site. Be real careful with this. You will
IPL the RES pack that you point to
via the hardware address. However VM will use the WK1, WK2 ..... packs
that are at the lowest hardware address.
Even if I rename the volumes to something else? I was going to do this
from z/OS which sees these volumes but does not know about the datasets.
example:

800  510RES           900     510RES
801  510WK1           901     510WK1
802  510WK2           902     510WK2

In the above example if I IPL 800, VM will use 801 and 802
I was thinking more like:
800  X51RES           900     510RES
801  X51WK1           901     510WK1
802  X51WK2           902     510WK2

Will that not work if I IPL from 900?
If I IPL 900, VM will still use 801 and 802 since they have the lower
hardware address.

In order to have the IPL of 900 use the packs at address 901 and 902 you
will need to change
the names of the packs. You will also need to change the names of the
packs in the system config
file.

If I can do the afore-mentioned, then I should not have to touch anything
else, right?


Regards,
   John

IBM Advanced Technical Support
Washington Systems Center,
Endicott NY, 13760
[EMAIL PROTECTED]
607-429-4703, tl 620



Ranga Nathan <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
12/01/2004 02:34 PM

Please respond to
Linux on 390 Port


To
[EMAIL PROTECTED]
cc

Subject
Re-IPL from backups








I have snapped the RES, WRK and SPL volumes to another set of volumes. Now
I want to make sure that I  can IPL from the backup volumes.
My thinking is:

Shutdown z/VM and the guests
Re-name volids for existing 510RES, WRK and SPL  to something else.
Re-name volids of the backups to correspond to 510RES etc.
IPL from the new 510RES with appropriate address.

Will this work? Are there any gotchas?

__________________________________________
Ranga Nathan / CSG
Systems Programmer - Specialist; Technical Services;
BAX Global Inc. Irvine-California
Tel: 714-442-7591   Fax: 714-442-2840

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to