Answerin all:

- No zone keeping
- No problems with cables. The shark is working if I connect it directly to
CPU.
- The FCP, disk and tape are working using the switch
- This is a brand new installation: z800 (old machine with 2 ficon cards),
macdata s3232, z750, Ultrium Tape (LTO).

The only thing is I cannot use the ficon to shark passing through switch. I
cannot turn the logical path online.

----- Original Message -----
From: "Ledbetter, Scott E" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 08, 2004 13:48
Subject: Re: z800 Shark 750 McData 3232 zVM 4.3 Ficon Problems


1) Do you have zoning keeping the in port from seeing the out port?
2) I had a Fibre Channel problem a few months ago where the devices were
seen by the switch, but couldn't transfer one iota of 'real' data.  The
problem was a bad GBIC.  I think bad cables can cause similar issues.
Swap
in known good components, if possible, to eliminate these possibilities.

Scott Ledbetter
StorageTek

-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Davis,
Larry
Sent: Wednesday, December 08, 2004 8:10 AM
To: [EMAIL PROTECTED]
Subject: Re: z800 Shark 750 McData 3232 zVM 4.3 Ficon Problems


Is this a new McData FICON switch or do you already have items on it.

Larry

-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
grodolfi
Sent: Wednesday, December 08, 2004 09:50 AM
To: [EMAIL PROTECTED]
Subject: z800 Shark 750 McData 3232 zVM 4.3 Ficon Problems

I have the following configuration:

CHPID PATH=(34),TYPE=FC,PARTITION=(ZVM01),SWITCH=01
CHPID PATH=(36),TYPE=FC,PARTITION=(ZVM01),SWITCH=01
CNTLUNIT   CUNUMBR=FD01,PATH=(34,36),UNITADD=((00,125)),
            UNIT=3990,CUADD=0,LINK=(01,03)
IODEVICE   ADDRESS=(F900,84),CUNUMBR=(FD01),UNIT=3390,
            UNITADD=00,STADET=Y
IODEVICE   ADDRESS=(F300,41),CUNUMBR=(FD01),UNIT=3390,
            UNITADD=54,STADET=Y

The logical path to dasd are not becoming online. The McData has
everything
online and from the CPU side everything seems ok too.

q chpid 34
Path 34 offline to devices F300 F301 F302 F303 F304 F305 F306 F307 Path 34
offline to devices F308 F309 F30A F30B F30C F30D F30E F30F Path 34 offline
to devices F310 F311 F312 F313 F314 F315 F316 F317 Path 34 offline to
devices F318 F319 F31A F31B F31C F31D F31E F31F Path 34 offline to devices
F320 F321 F322 F323 F324 F325 F326 F327 Path 34 offline to devices F328
F900
F901 F902 F903 F904 F905 F906 Path 34 offline to devices F907 F908 F909
F90A
F90B F90C F90D F90E Path 34 offline to devices F90F F910 F911 F912 F913
F914
F915 F916 Path 34 offline to devices F917 F918 F919 F91A F91B F91C F91D
F91E
Path 34 offline to devices F91F F920 F921 F922 F923 F924 F925 F926 Path 34
offline to devices F927 F928 F929 F92A F92B F92C F92D F92E Path 34 offline
to devices F92F F930 F931 F932 F933 F934 F935 F936 Path 34 offline to
devices F937 F938 F939 F93A F93B F93C F93D F93E Path 34 offline to devices
F93F F940 F941 F942 F943 F944 F945 F946 Path 34 offline to devices F947
F948
F949 F94A F94B F94C F94D F94E Path 34 offline to devices F94F F950 F951
F952
F953 Ready; T=0.01/0.01 09:50:09 q chpid 36 Path 36 offline to devices
F300
F301 F302 F303 F304 F305 F306 F307 Path 36 offline to devices F308 F309
F30A
F30B F30C F30D F30E F30F Path 36 offline to devices F310 F311 F312 F313
F314
F315 F316 F317 Path 36 offline to devices F318 F319 F31A F31B F31C F31D
F31E
F31F Path 36 offline to devices F320 F321 F322 F323 F324 F325 F326 F327
Path
36 offline to devices F328 F900 F901 F902 F903 F904 F905 F906 Path 36
offline to devices F907 F908 F909 F90A F90B F90C F90D F90E Path 36 offline
to devices F90F F910 F911 F912 F913 F914 F915 F916 Path 36 offline to
devices F917 F918 F919 F91A F91B F91C F91D F91E Path 36 offline to devices
F91F F920 F921 F922 F923 F924 F925 F926 Path 36 offline to devices F927
F928
F929 F92A F92B F92C F92D F92E Path 36 offline to devices F92F F930 F931
F932
F933 F934 F935 F936 Path 36 offline to devices F937 F938 F939 F93A F93B
F93C
F93D F93E Path 36 offline to devices F93F F940 F941 F942 F943 F944 F945
F946
Path 36 offline to devices F947 F948 F949 F94A F94B F94C F94D F94E Path 36
offline to devices F94F F950 F951 F952 F953 Ready; T=0.01/0.01 09:50:14

vary on f300

HCPCPN6283I Device F300 cannot be varied online because no channel path is
avail able.

HCPCPN6785E Unable to identify device F300 dynamically.

1 device(s) specified; 0 device(s) successfully varied online

Ready(06785); T=0.01/0.01 09:50:49

q path f300
Device F300, Status OFFLINE
CHPIDs to Device F300 (PIM)  : 34 36
 Physically Available (PAM)  : +  +
 Online               (LPM)  : -  -
                      Legend     + Yes - No
Ready; T=0.01/0.01 09:51:31

Any clues about what could be happening ?


---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Esta mensagem foi verificada pelo E-mail Protegido Terra.
Scan engine: McAfee VirusScan / Atualizado em 01/12/2004 / Versco:
4.4.00 - Dat 4411
Proteja o seu e-mail Terra: http://www.emailprotegido.terra.com.br/


---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to