Thanks for responding. Unfortunately changing "noauto;qeth0,0x0620,0x0621,0x0622,0,0,0" with: "noauto;qeth2,0x0620,0x0621,0x0622,0,0,0".
in /etc/chandev.conf did not change anything. qeth0 should be fine anyway. Do I need to do anything special under z/VM for Linux guest for hipersockets. Peter Gianfranco Ciotti <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[email protected]> 01/07/2005 11:05 AM Please respond to Linux on 390 Port <[email protected]> To [email protected] cc Subject Re: Linux Hipersockets under z/VM Friday 07 January 2005 16:45, You wrote: > I am having problems with hipersocket. I have hipersockets working fine on > 2 native Linux LPARs however, this is my first attempt under z/VM. > > linuxm01:/etc/sysconfig/network # ifconfig hsi0 > hsi0: error fetching interface information: Device not found [cut] > In /etc/chandev/conf > ... > noauto;qeth0,0x0600,0x0601,0x0602,0,0;add_parms,0x10,0x0600,0x0602,portname > :OSD00 > noauto;qeth1,0x0610,0x0611,0x0612,0,0;add_parms,0x10,0x0610,0x0612,portname > :OSD03 > noauto;qeth0,0x0620,0x0621,0x0622,0,0,0 ^^^^ in /etc/chandev.conf modify "noauto;qeth0,0x0620,0x0621,0x0622,0,0,0" with: "noauto;qeth2,0x0620,0x0621,0x0622,0,0,0". -- Gian ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
