YES, I think it was new with sles9 ?
John
MOEUR TIM C
<[EMAIL PROTECTED]
om> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Re: LVM, SLES9 and 64 bit
02/09/2006 03:08
PM
Please respond to
Linux on 390 Port
Sorry about that -
I'm on SLES9 with Linux version 2.6.5-7.244-s390x
No, I haven't been running mkinitrd and zipl, (forgive me, I'm new at
the Linux on s390 stuff). I was pretty certain that for the successful
LVM that I created that I hadn't done that, but it was some time back,
and I might have done just that while following a cookbook.
I'm now using YaST to build the LVM volume groups, join the physical
volumes to it, and also to create the logical volumes. Are you saying
that I also need to then exit yast and run mkinitrd and zipl?
Tim
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
John Schnitzler Jr
Sent: Thursday, February 09, 2006 11:52 AM
To: [email protected]
Subject: Re: LVM, SLES9 and 64 bit
Tim are you running the mkinird and the zipl after defining the LVM?
You didn't say what version of linux you are using.
John
Hello all,
I've been fighting an LVM problem and searching through the archives and
I stumbled on this from Mark Post from a while back:
Re: /tmp as a logical volume
Post, Mark K
Tue, 21 Jun 2005 21:35:24 -0700
>I'm beginning to have doubts about LVM (version 1 at least) on 64-bit
>systems. I've had two cases where my volume groups have disappeared
after an
> IPL, and hence all my logical volumes. Emails to the linux-lvm mailing
list
> have gone unanswered. I don't know if it's because I'm running
Linux/390,
> LVM 1 or what. Having said that, if you're going to use LVM, using it
for
> /tmp is certainly the safest. According to the FHS, the contents of
/tmp are > not guaranteed across a reboot anyway.
This describes my troubles exactly, I create some LVM volume groups
(and logical volumes), but they don't survive through an IPL. What I
haven't been able to find is any resolution of this problem. What makes
it worse, is that I've done it successfully with other volume groups.
Mark (or anybody else that shares my woes), have you found any more
information about this?
Tim
[EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
