Can you let me know what is your /etc/zipl.conf ? And also let me know if
you are using a CMS formatted disk. If it is a CMS formatted disk then you
can not put swap to it. and also give me the output for lsdasd. It would
help me in debugging.
Thanks & Regards,
Srinivasa R Chamarthy ([EMAIL PROTECTED]),
-----------------------------------------------------------------------
Linux on System z (RedHat CSVT), Linux Technology Center,
IBM India Systems and Technology Labs, Manyata D2 Block,
Nagavara, Outer Ring Road, Bangalore - 560045, INDIA.
Phone: +91-80-40255025(Direct) Location: MD2-GB-162
John White
<[EMAIL PROTECTED]
m> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
RedHat ES 4 using VDISK
07/18/2007 02:18
AM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
IST.EDU>
We are implementiong RedHat ES update 4, on a z9 on z/VM 5.2. We are
attempting to use VDISK for additional swap space without using SWAPGEN.
I have followed the recommendation found from velocity-software.com. I
add Linux boot parameter. I am unable run the mkswap /dev/dasdx. After
IPL, I don't see any reference to the specified device. Any help would
be greatly appreciated.
John C. White
FedEx Services
[EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
